Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


Reply

Rem 700 VTR Feed Problems

 
LinkBack Thread Tools Display Modes
  #1  
Old 06-21-2010, 11:46 PM
Junior Member
 
Join Date: Jun 2010
Posts: 7
Rem 700 VTR Feed Problems

So I worked up my first load for my new Remington VTR in .243 today and took it to the range, it shot great except for the fact that it would not feed effectively. The rounds were difficult to push in to the magazine and when I operated the bolt only the surface of the brass was scrapped. I was using nosler 95gr ballistic tips and the C.O.L was 2.71, and there was plenty of room in the magazine. I took it home and played around with it for a while with no success. Any ideas?
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Rem 700 VTR Feed Problems
Thread Thread Starter Forum Replies Last Post
Magizine Feed problems j_unzicker Gunsmithing 3 02-16-2011 05:10 PM
savage 200 convert center feed mag to stagered feed jeb20208 Gunsmithing 4 10-27-2010 11:23 PM
Controlled round feed vs push feed. RockyMtnMT Rifles, Bullets, Barrels & Ballistics 8 02-05-2009 05:03 PM
Winchester mod 70 Push feed vs Controlled round feed? samson Rifles, Bullets, Barrels & Ballistics 4 02-13-2006 08:10 AM
What to feed my 25-06 tom baker Rifles, Bullets, Barrels & Ballistics 6 05-24-2003 06:44 PM


All times are GMT -5. The time now is 06:06 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC