Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


Reply

RCBS Rockichucker Supreme Owners

 
LinkBack Thread Tools Display Modes
  #1  
Old 02-20-2009, 07:14 PM
Platinum Member
 
Join Date: Jan 2004
Location: Blackfoot, Idaho
Posts: 8,047
RCBS Rockichucker Supreme Owners

Need some info. I'm on a fast track project and need some dimensions. The press isn't here yet but I can build the table top press holder if I can get the following dimensions. (Apartment living sux.......)

Need: (in inches)

Distance from bottom of mounting base to bottom of the press (the bottom of the thing with the handle screwed into it, with the handle in a position were that bottom piece is at its lowest point (it may be with the handle all the way up??) and,

the distance of the end of the handle below perpendicular when the ram is all the way up.

Not to critical on measurements. How about w/in 1.0002"

Make sense??

Thanks in advance.
Reply With Quote
  #2  
Old 02-20-2009, 07:54 PM
Platinum Member
 
Join Date: Dec 2002
Location: Northern Michigan
Posts: 1,014
Re: RCBS Rockichucker Supreme Owners

7.5625" from mounting plate to the bottom of the base plate where the handle goes. In the up position. 6.1875" in the down position.

11.375" from mounting plate to far side of the handle in the down position.

These numbers were provided via tape measure.....I have a pretty good eye. I also had to use a level on that last number.

I had to change #1, the nut is the lowest object. The first time I measured to the bar.

Last edited by MagMan; 02-20-2009 at 08:04 PM.
Reply With Quote
  #3  
Old 02-20-2009, 08:13 PM
Platinum Member
 
Join Date: Dec 2002
Location: Northern Michigan
Posts: 1,014
Re: RCBS Rockichucker Supreme Owners

I lied, Ihave a RC2 not a Supreme.
Reply With Quote
  #4  
Old 02-20-2009, 08:28 PM
Platinum Member
 
Join Date: Jan 2004
Location: Blackfoot, Idaho
Posts: 8,047
Re: RCBS Rockichucker Supreme Owners

Magman,

Close enough

Thanks a bunch.

It's off to the lumber yard..........
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: RCBS Rockichucker Supreme Owners
Thread Thread Starter Forum Replies Last Post
Supreme 780 and 300 Win Mag alaska Reloading 0 10-04-2010 11:29 AM
all over now, just got into reloading with a RCBS rockchucker Supreme stryker Reloading 2 02-07-2010 06:13 PM
Obama declares war on America's gun owners with Supreme Court pick cjmousseau Politics Of Hunting And Guns (NOT General Politics) 0 05-27-2009 06:23 PM
US Supreme Court dbhostler General Discussion 3 03-23-2008 09:25 PM
Winchester Supreme Elite B.C? 270yotekiller Rifles, Bullets, Barrels and Ballistics 1 04-28-2007 04:29 PM

Current Poll
Do you plan to buy a new custom rifle in the next 12 months?
YES - Of course - 72.94%
1,650 Vote
NO - wife/girlfriend won't let me. - 27.06%
612 Votes
Total Votes: 2,262
You may not vote on this poll.

All times are GMT -5. The time now is 10:40 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC