close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions

Reply

Prepping and painting a stock

LinkBack Thread Tools Display Modes
  #1  
Unread 05-01-2013, 09:54 PM
Platinum Member
 
Join Date: Sep 2002
Location: colorado
Posts: 1,061
Prepping and painting a stock

Ive got a Factory rifle stock that needs to be painted. My question is mainly about prepping the stock, the stock has a real glossy finish.. what's the best way to get this paint off? I figure my options are sanding or paint thinner? What do you guys do? I know some just leave the paint on and paint over but im concerned the glossy paint wont let the new paint stick too well... Thanks for you help
Reply With Quote
  •   #2  
    Unread 05-04-2013, 11:54 AM
    Junior Member
     
    Join Date: Nov 2012
    Location: DFW, TX
    Posts: 28
    Re: Prepping and painting a stock

    It depends somewhat on the paint. Some respond better to certain strippers than others, so you may need to try a couple different products to find the most effective one. I've used DuraCoat on rifle stocks and found CitriStrip a pretty good stripper for it. Acetone works well too, but I don't want to pour the used contents down the drain. Whatever you find works best for the paint on your stock, you'll still need a small brush to scrub the corners and hard to reach places.
    __________________
    M1AShooter
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 11:20 PM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC