Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


Reply

PRAIRIE GUN WORKS VISIT

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-09-2002, 02:15 PM
Platinum Member
 
Join Date: May 2001
Location: Sask. Canada
Posts: 2,410
PRAIRIE GUN WORKS VISIT

I had the opportunity to visit Ross Spagrud yesterday at his Prairie Gun Works in Winnipeg - really enjoyed the opportunity to see a bunch of fine rifles in many stages of completion including several which were ready for shipment.

Ross obviously knows his stuff and his rifles show a lot of precision. They are made of proven stuff - like Pac Nor barrels and McMillan stocks and of course the unique Prairie Gun Works action series. Not every day you see a large cylinder of Titanium and get to handle an action in its absolute earliest stages.

Anyone interested in extremely well built rifles, ranging from 4 plus pound titanium actioned mountain rifles to heavy duty tactical actions that will handle ANY cartridge out there (I expect Ross's big action could handle a 20mm cannon cartridge necked down to .17 cal. if you really feel the need...) - check out the Prairie Gun Works website.

Anyone traveling through Winnipeg Manitoba would enjoy meeting Ross, talking state of the art rifles and cartridges, and seeing his shop. Ross has a well equipped shop that is layed out to do one thing - build quality rifle actions (and rifles).

I look forward to shooting a PGW rifle in the future - have a hunch already how it will perform.
Reply With Quote
  #2  
Old 04-09-2002, 08:19 PM
Silver Member
 
Join Date: Dec 2001
Posts: 469
Re: PRAIRIE GUN WORKS VISIT

Ian, did you get a chance to see the T-wolf action???

Question for Ross:

What are the specs on the standard T-wolf rifle that you guys build? Barrel length & taper with and without muzzlebreak, and rifle weight without scope??

I realize the specs vary, but what are the spec's on the rifle pictured on your website?
Reply With Quote
  #3  
Old 04-10-2002, 09:57 AM
Platinum Member
 
Join Date: May 2001
Location: Sask. Canada
Posts: 2,410
Re: PRAIRIE GUN WORKS VISIT

90,
Handled a T-wolf action and a complete little-brother, the Coyote tactical rifle and they are extremely well machined, very nice. Titanium actions are just plain amazing for light. Look somewhat like a Rem. 700 with a bunch of stuff done that Remington would never get around to doing. Absolutely true, square and straight, humunguous recoil lugs, very nice Picatinny rails integral, dual ejectors, good sized Sako style extractors, will take any trigger a 700 will I believe.

I believe that this is a sound action design and when you screw in a good barrel and put it into a good stock properly - has to shoot.

No chance to shoot one yet, that will be interesting.
Reply With Quote
  #4  
Old 04-10-2002, 10:43 AM
Silver Member
 
Join Date: Dec 2001
Posts: 469
Re: PRAIRIE GUN WORKS VISIT

Was the Coyote action titanium? What about the T-Wolf, was it titanium, was it heavy?
Reply With Quote
  #5  
Old 04-10-2002, 03:56 PM
Platinum Member
 
Join Date: May 2001
Location: Sask. Canada
Posts: 2,410
Re: PRAIRIE GUN WORKS VISIT

90,
I hope that Ross jumps in here, I must admit to being like a kid in a candy story and cannot remember those details. Sorry, the actions that I handled were amazing - there is a huge weight difference between steel and titanium.
I hope to shoot a Coyote .308 tactical or something similar since I use that caliber so much - if it ever stops freaking snowing.
Reply With Quote
  #6  
Old 04-10-2002, 09:04 PM
Bronze Member
 
Join Date: Aug 2001
Location: Winnipeg
Posts: 30
Re: PRAIRIE GUN WORKS VISIT

First off let me say that it was a pleasure
hosting Ian and his son at our shop. His
profound experience as a writer, photographer
and consultant is truly amazing.

Ian caught us at a rare moment with a number
of completed rifles and actions on hand
prior to shipping and we were able to demo
virtually our entire line.

At the time of his visit we had only one
Titanium tactical action for viewing and
it was a COYOTi titanium.

Our standard Timberwolf sports a 28" barrel
(338 Lapua) that has a 1.3" shank for 5"
and tapers to .900 at 28". The weight of
this rifle w/o optics is 15 3/4lbs and
we use a 1-10 twist. We use LOTS of Pac
Nor barrels and generally reccommend this
line. We also are big fans of McMillan
Stocks and Leupold optical products.

Stephen and I work very hard in a hostile
environment to provide the best possible
products and we are proud of our entire
product line.

We will be supplying Ian with a number of
different rifles for evaluation in the very
near future and we very much look forward to
his input and advice.

ANYBODY travelling through central Canada
is welcome to visit the shop and in fact this
happens fairly regularly. Today we hosted
a fellow from Australia who was here on business and yesterday a fellow from Colorado
who was here on business stopped by for the
grand tour.

Ross
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: PRAIRIE GUN WORKS VISIT
Thread Thread Starter Forum Replies Last Post
A Scary Visit Southpaw Humor 1 06-01-2010 10:08 AM
Anybody visit Bushnell @ SHOT wadedc Long Range Scopes and Other Optics 5 01-20-2009 12:43 PM
return visit rifleshooter Coyote Hunting - From 10 Yards to over 1,000 Yards 1 07-29-2008 07:04 PM
Sennybridge F range visit Gerald89 General Discussion 7 06-20-2006 02:19 PM
KY Visit Gerald89 General Discussion 3 03-23-2005 02:57 PM

Current Poll
I currently have hunting preference points in the following states

All times are GMT -5. The time now is 10:00 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC