Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


Reply

Imperial Size Wax

 
LinkBack Thread Tools Display Modes
  #8  
Old 10-11-2010, 10:42 PM
Silver Member
 
Join Date: Oct 2006
Location: Oregon City, OR
Posts: 486
Re: Imperial Size Wax

I also rub my finger across the mouth of the case to help it slip over the expander ball (if You use one)

Its the best stuff i have found!
Reply With Quote
  #9  
Old 02-01-2011, 09:05 PM
Bronze Member
 
Join Date: Jan 2010
Posts: 99
Re: Imperial Size Wax

most of the different lubes I've used for reloading are only good at room temperature. When you get cold, it doesn't work as well. Lee lube, Hornady One Shot and Imperial Wax. For anything less than nth degree reloading, I lube about every 3rd case.

For neck sizing, I went with the powdery neck sizing stuff from Redding. To me, it is less messy than Imperial Sizing wax.
Reply With Quote
  #10  
Old 02-02-2011, 04:56 PM
Platinum Member
 
Join Date: Jun 2010
Location: greenwood, IN
Posts: 3,638
Re: Imperial Size Wax

I use nothing but Imperial for full length resizing. But I'm experimenting with a product from Lucas Oil and Royal Purple. For neck sizing I use nothing but powdered graphite
gary
Reply With Quote
  #11  
Old 03-13-2011, 04:03 PM
Bronze Member
 
Join Date: Mar 2007
Location: Noble Ok
Posts: 88
Re: Imperial Size Wax

Like the rest said but I also use a Q tip and LIGHTLY lube inside of neck. Have not stuck a case since. After all sizeing is done I rinse the brass in acetone then load and wipe down. They look like they just came out of the viberator.
Reply With Quote
  #12  
Old 03-14-2011, 08:49 PM
Silver Member
 
Join Date: Apr 2010
Location: Roseburg, Oregon
Posts: 328
Re: Imperial Size Wax

I also use Imperial Sizing Wax. I also use a Qtip. I also use a light amount on inside of the neck, about every five on big cases . Then wipe down after sizing. Never used acetone. Geno22 how come You use acetone?
Reply With Quote
  #13  
Old 03-28-2011, 07:05 PM
Bronze Member
 
Join Date: Mar 2007
Location: Noble Ok
Posts: 88
Re: Imperial Size Wax

Quote:
Originally Posted by gunaddict View Post
I also use Imperial Sizing Wax. I also use a Qtip. I also use a light amount on inside of the neck, about every five on big cases . Then wipe down after sizing. Never used acetone. Geno22 how come You use acetone?
Reason for acetone is to clean wax from inside of neck and out side before I put the brass in the viberator. This will stop as I am getting the Tumbler with the small rods in the fluid. Havnt made up my mind whitch rods Im gonna use (stainless or brass) they both do a excellent job.
Reply With Quote
  #14  
Old 04-05-2011, 10:45 AM
Bronze Member
 
Join Date: Apr 2011
Location: Pa
Posts: 51
Re: Imperial Size Wax

How much do you need ?
__________________
“Never before have such lions been led by such lambs.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Imperial Size Wax
Thread Thread Starter Forum Replies Last Post
To neck size or full length size??? meatyrem Reloading 47 06-08-2014 08:43 PM
338 Imperial loads??? WSlayman Reloading 29 09-26-2011 06:27 PM
neck size or full length size????? bigbuck Reloading 41 12-23-2009 04:31 PM
.338 Imperial, 225AB and RL22 = WSlayman Reloading 5 10-09-2008 04:14 AM
Crescent Imperial Hammerless Double Barrell Shotgun tdv75098 Guns For Sale 1 05-22-2005 08:18 PM


All times are GMT -5. The time now is 01:47 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC