close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions

Reply

HS Precision

LinkBack Thread Tools Display Modes
  #1  
Unread 06-25-2009, 08:35 AM
Junior Member
 
Join Date: May 2009
Posts: 9
HS Precision

I need some info please. I found a HS precision stock for a 700 sa that says "barrel channel has been opened to a #4 krieger barrel countour very tight fit". How would this work or NOT work on a 700 .308 stainless steel 24" factory barrel please?
thanks
Reply With Quote
  •   #2  
    Unread 07-16-2009, 09:46 PM
    Official LRH Sponsor
     
    Join Date: Jun 2004
    Location: Fort Shaw, Montana
    Posts: 6,847
    Re: HS Precision

    Does the 308 have a sporter barrel or heavy barrel?

    If its a sporter, it will likely drop into that stock with room to spare.

    If its a heavy contour Rem barrel, the barrel channel will need to be opened up out toward the forend as the #4 Krieger is not an overly large barrel.

    The barrel shank section of the barrel channel will not match up with either of the Rem contours but if that does not bother you to have a bit more air around the barrel in this area it makes no real difference as far as functionality.
    __________________
    Kirby Allen(50)

    Allen Precision Shooting
    Home of the Allen Magnum, Allen Xpress and Allen Tactical Wildcats and the Painkiller Muzzle brakes.

    Farther, Faster and Flatter then ever before.

    Web Page: www.apsrifles.com

    allenmagnum@gmail.com
    Reply With Quote

    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: HS Precision
    Thread Thread Starter Forum Replies Last Post
    WTS 7MM Rem. Mag. HS Precision elkhunter6767 Guns For Sale 1 03-08-2011 05:30 PM
    HS precision SPL 300wm wtih S&B precision hunter scope Toddm Guns For Sale 18 01-21-2011 06:20 PM
    hs precision screech General Discussion 1 02-04-2007 12:42 AM
    HS Precision 338 RUM RDM416 Equipment Discussions 2 08-05-2005 10:13 PM
    HS Precision HTR jumpin joe Equipment Discussions 1 08-30-2003 02:34 PM


    All times are GMT -5. The time now is 04:54 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC