Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


Hornady custom grade new dimension dies

LinkBack Thread Tools Display Modes
Unread 09-06-2004, 07:33 PM
Silver Member
Join Date: Aug 2004
Location: utah
Posts: 302
Re: Hornady custom grade new dimension dies

hornady,RCBS,and even redding's standard
dies are crap. I am guessing that you have
a standard neck chamber, but even with that
you can get your run out consistently at .001
with some sort of bushing die like Redding
or wilson with the proper size bushing to
minimal size your brass. with standard dies
you oversize it by taking it .015 too small
then stretching it back,sure you can get 15
or 20 out of 100 back to .001 but 15 or 20
will be at .010 and all point's inbetween
make yourself happy and order a bushing die
and you will never say hornady again and be
happy about it
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: Hornady custom grade new dimension dies
Thread Thread Starter Forum Replies Last Post
Hornady New Dimension 'Match Grade' dies milanuk Reloading 2 12-10-2010 09:42 PM
Hornady Custom Grade "New Dimension" 2 Die Set? Good? Troutslayer2 Reloading 15 06-13-2010 11:19 AM
Custom Hornady Dies? bowhunthard Reloading 4 12-25-2009 04:21 PM
7mm Rem Mag once fired brass, and/or, Hornady Custom 7mm dies Willfully Armed Reloading Equipment and Components 1 07-23-2009 10:58 PM
Best Hunting Grade Custom Action lerch Rifles, Bullets, Barrels & Ballistics 5 03-24-2006 09:12 PM

All times are GMT -5. The time now is 05:37 PM.

All content ©2010-2015 Long Range Hunting, LLC