Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


Reply

Get Some Coppermelt!

 
LinkBack Thread Tools Display Modes
  #1  
Old 07-07-2005, 05:17 PM
Silver Member
 
Join Date: Jan 2005
Posts: 460
Get Some Coppermelt!

I got my bottle of coppermelt last week but I didn't have any stainless core brushes. I got back from shooting earlier this afternoon and the brushes had arrived. I started cleaning and I was on the couch before I knew it! I shoot a factory remington and it still only took 7 patches to clean it! This stuff is excellent and it is worth every penny, I would highly recommend trying it.
Reply With Quote
  #2  
Old 07-09-2005, 12:55 PM
Gold Member
 
Join Date: Feb 2005
Location: Texas born and raised
Posts: 746
Re: Get Some Coppermelt!

I have to add about just about identical input.

I got my CM order in week before last, and headed to several places to pick up some nylon brushes. None could be found. Man I was bummed. So, I ordered up a batch from Midway whci turned out decent as I squeezed in a couple of boxes of bullets I had been wanting with them. LOL

Got the brushes in yesterday and set up this morning, at 10:30 on two rifles. Both had already been scrubbed to death with conventional solvents and brushes. The first was the .270, and after 5 patches it was a done deal. Probably ws good after three but just really couldn't believe it. Second was my little Ruger Compact in .308. I know this thing had close to if not over a hundered rounds through it before the initial cleaning a couple weeks back. I just finially got tired of working on it and ordered the CM. Well after 7 patches it was a done deal. Now it is only 10:50, and I am done with two rifles thoroughly clean. Well back to the vault and grab up three more. Third was a 7mag, which has had some serious duty also. It was to be next for the solvent but after getting tired on the .308 I decided to wait. WEll 11 patches, and 15 minutes it was a done deal. A .243, as well as an old Enfield British .303 all got the treatment. Heck if I hadn't stopped for lunch I would probably still be dragging stuff out. LOL

The only thing was that on the 7mag, I would got a clean patch at about 7, then when I ran the dry patch through it came out light blue. So in went another wet patch and sure enough it would be blue again. I figured that it was just getting the last of the finite stuff out and was taking a little longer getting it up. The Enfield also took a few more patches than I had expected, but who knows how long some of that stuff had been embedded in there. I hate to say it but I actually enjoyed cleaning rifles for a change. That means now I can go get them all dirtied up again. LOL

Any way you slice this stuff, you can't beat it. If you haven't got some get it, and if your still sceptical, find someone close who has some and let them show you how well it works. I guarantee you will be well pleased with it.
__________________
Later,
Mike / Tx

My Photo's

"Heck why would I lie, most folks don't believe the truth when I tell them"
Reply With Quote
  #3  
Old 07-10-2005, 05:30 PM
daveosok
 
Posts: n/a
Re: Get Some Coppermelt!

I got two bottles of it in and went to the gun shop to get smaller nylon brushes.
I opened it up and it was slightly under pressure and sprayed a little on the workbenck.
I could smell it immediately and it smelt worse than my shooters choice or buches bore shine by at least a 30% worsening smell.
The stuff works...period. Wifes rifle was first up and it had been shot quite a few times, I would say around 50 or so rounds and no ceaning. This is a factory sporter weight 7mm stw and the barrel foule horribly after four rounds.
Three patches, first one was black as coal, second was a light greyish blue, third was a discolored off white but no noticble copper residue or "blue color".
Amazing is all I can say, after using a home made foul out system and after three applications usually, at least 4 patches had to be run though it to fully remove all traces of copper, this coppermelt had three applications and removed it fully without the 15 mintues each time I used to foul out system.
This CopperMelt is extreme as its name implies and works like nothing else I have seen or probably will.
I ordered two bottles and Monday will order two more just incase the guys cant GTST and dont sell anymore.
Thanks to whoever gave the address for the sports store who had it.
Dave
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Get Some Coppermelt!
Thread Thread Starter Forum Replies Last Post
coppermelt? 257speed Equipment Discussions 11 01-05-2009 12:32 PM
How to use coppermelt in my .308??? ElwoodB Equipment Discussions 14 05-20-2007 04:13 PM
Where to buy Coppermelt? 270WSM Equipment Discussions 10 10-11-2005 11:50 PM
Coppermelt? Okiecat Equipment Discussions 0 05-26-2005 09:05 PM
Who's been getting Coppermelt lately and from whom?? goodgrouper Equipment Discussions 13 04-09-2005 12:22 AM

Current Poll
Do You Shoot Rifle Competition?
YES - 33.38%
769 Votes
NO - 66.62%
1,535 Vote
Total Votes: 2,304
You may not vote on this poll.

All times are GMT -5. The time now is 04:48 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC