Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


Reply

Extractor question for Smiths

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-09-2006, 09:34 AM
Platinum Member
 
Join Date: Jul 2002
Posts: 2,856
Extractor question for Smiths

Hey guys , I was looking at Badger Ordanance site and saw their m-16 style extractors and was wondering what the differance in quality was between the M-16 and ther sako style when instaled on a Rem 700 , caliber would be on the 30-06 case
I don't think that the m-16 can be used on the non mag cases but would still like to know the differance.
__________________
Si Vis Pacem Parabellum
Molon Labe
Reply With Quote
  #2  
Old 03-09-2006, 09:06 PM
Official LRH Sponsor
 
Join Date: Jun 2004
Location: Fort Shaw, Montana
Posts: 6,793
Re: Extractor question for Smiths

The M-16 style is a pinned in extractor. Rotates off a precisely fitted pin. Can not be blown out of the bolt in the case of a case head failure like the Sako can. Also there is alot more steel in the BO extractor.

The are listed for the magnum and super mag(Lapua) case sizes but I would imagine it the smaller could be fitted for an '06. The Sako extractor, at least the Tubbs kit is the same extractor for the '06 and belted magnum rounds.

A bit more machining for the Bad Ord extractor but the best out there I have fitted.

Kirby Allen(50)
__________________
Kirby Allen(50)

Allen Precision Shooting
Home of the Allen Magnum, Allen Xpress and Allen Tactical Wildcats and the Painkiller Muzzle brakes.

Farther, Faster and Flatter then ever before.

Web Page: www.apsrifles.com

allenmagnum@gmail.com
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Extractor question for Smiths
Thread Thread Starter Forum Replies Last Post
payment question for smiths jacack Gunsmithing 19 02-26-2010 02:27 AM
A question for you Smiths out there (A-Bolt) Slopeshunter Rifles, Bullets, Barrels and Ballistics 3 11-01-2006 06:00 PM
Sako extractor question for smiths James Jones General Discussion 2 07-05-2006 08:32 AM
Question for smiths on Blueprinting James Jones General Discussion 1 05-11-2006 02:57 PM
Question for Gun Smiths dakor General Discussion 9 06-07-2005 04:05 PM

Current Poll
Are you on Facebook?
Yes - 46.49%
1,093 Vote
No - 19.35%
455 Votes
No, but I may join - 1.74%
41 Votes
No way, are you kidding? - 36.20%
851 Votes
Total Votes: 2,351
You may not vote on this poll.

All times are GMT -5. The time now is 03:07 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC