close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions

Reply

cheek raise comb for stock.....

LinkBack Thread Tools Display Modes
  #8  
Unread 01-28-2009, 10:22 PM
Platinum Member
 
Join Date: Jul 2002
Posts: 2,855
Re: cheek raise comb for stock.....

I use the "loggerhead" unit from Terry Cross ,its very sturdy , light weight and the thing easly comes out with the turn of a 3/16" allen wrench but when its tight you will wreck yout stock trying to get it out ,best of all the thing locks in its set hight so you can pop it on and off for cleaning and not loose your set height , here are two rifles with them installed. Granted it does take a bit more work than Shawn's I feel that they are well worth it.



__________________
Si Vis Pacem Parabellum
Molon Labe

Last edited by James Jones; 01-28-2009 at 10:26 PM.
Reply With Quote
  •   #9  
    Unread 01-29-2009, 04:45 AM
    Gold Member
     
    Join Date: Jan 2007
    Location: South Dakota
    Posts: 753
    Re: cheek raise comb for stock.....

    The one I've made for a long time now has always had a good response from folks as it's quick detachable while still maintaining the height setting. Nice for dropping the bolt out of a long action. Bronze bushed, fully machined, thumbwheel has detents timed with a Warner 1000 yard sight so that if you make an elevation change the cheekpiece moves with it to maintain unaltered sight alignment/stockwell. Won't do you much on a scope gun but it looks/feels cool when you move it.

    Just something to think about.

    It was on the rifle that won the 2007 world long range championships if that matters any.








    Last edited by NesikaChad; 01-29-2009 at 04:51 AM.
    Reply With Quote

      #10  
    Unread 01-29-2009, 11:15 AM
    Silver Member
     
    Join Date: Jan 2008
    Posts: 250
    Re: cheek raise comb for stock.....

    I just use a bit of closed cell foam and insulation tape, works as well as any expensive aftermarket bit of kit
    Reply With Quote
      #11  
    Unread 02-01-2009, 10:12 AM
    Silver Member
     
    Join Date: Dec 2007
    Posts: 297
    Re: cheek raise comb for stock.....

    thats what I am talking about chads way make it look good to
    Reply With Quote
      #12  
    Unread 02-03-2009, 11:33 AM
    Bronze Member
     
    Join Date: Jul 2008
    Posts: 63
    Re: cheek raise comb for stock.....

    Well I recieved my comb raise from ITC and it's really nice for the $$.

    It came with extra long velcro straps and the underside has a non slip
    surface, pretty impressive. The top surface is a wet suit material to help
    when you sweat, I'm takin' it.

    It came with 3 pieces of foam that slip into a sleeve. You can cut out the center
    of one piece of foam to create a spot weld, for quick target acquisition.

    $26 plus 4 bucks shipping. Now I have to get a rear rest when I lay prone.

    Last edited by chucksniper; 02-03-2009 at 11:43 AM.
    Reply With Quote
      #13  
    Unread 02-03-2009, 08:32 PM
    Junior Member
     
    Join Date: Jan 2008
    Posts: 28
    Re: cheek raise comb for stock.....

    I have the Karsteen on three rifles, light and easy to adjust. for hunting its durable and can put up with the weather. install is easy and can be done by you and not have to pay a gunsmith
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: cheek raise comb for stock.....
    Thread Thread Starter Forum Replies Last Post
    Weatherby stock cheek pad Autorotate Equipment Discussions 2 11-12-2014 01:49 PM
    Adjustable cheek piece for a raised comb? angus-5024 Gunsmithing 3 03-24-2010 08:35 PM
    manners stock + cheek sniperboy Long Range Hunting & Shooting 5 11-28-2009 11:23 AM
    HS precision stock with DE cheek piece RLA Gun Parts - Stocks, Barrels, Actions, etc. 1 10-04-2008 09:33 AM
    Rifle comb height on factory stock Slopeshunter Rifles, Bullets, Barrels & Ballistics 1 08-12-2006 06:24 PM


    All times are GMT -5. The time now is 08:37 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC