Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions


338am Hired gun shawn any one

LinkBack Thread Tools Display Modes
Unread 04-29-2007, 06:53 PM
Join Date: Jun 2007
Location: North Idaho
Posts: 1,877
Re: 338am Hired gun shawn any one


I am running 4.148" OAL with the 300 SMK. Let me know where you end up. Also I had to tune up the bottom of my die to set the shoulder back .003", it seemed with mine anyway that after 4 or 5 firings that the cases were hard to close and harder to open with the same loads. On the 2nd and 3rd firings no such problems exsisted. The interesting part is that I had to shave off .011" to do this. Now life is good. Mine shoots so good it is scary. I anchored a rockchuck with it a few days ago at 1073 yards on the second shot. I'll post about it in a day or two.
Shawn Carlock
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: 338am Hired gun shawn any one
Thread Thread Starter Forum Replies Last Post
My Buddy Shawn AKA Hired Gun... joecool Long Range Hunting & Shooting 12 11-18-2008 09:17 AM
338am grit Long Range Hunting & Shooting 19 07-30-2008 08:36 AM
building a 338am Booney Rifles, Bullets, Barrels & Ballistics 8 07-21-2008 06:03 PM
New 338AM is Home! magicofmt General Discussion 9 11-03-2007 10:36 AM
338am brass new shooter Rifles, Bullets, Barrels & Ballistics 5 01-24-2007 03:38 PM

All times are GMT -5. The time now is 12:01 PM.

Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC