close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Equipment Discussions

Reply

338 Edge build help

LinkBack Thread Tools Display Modes
  #1  
Unread 06-17-2013, 02:12 PM
Junior Member
 
Join Date: Jun 2013
Posts: 4
338 Edge build help

Newbie here. Been reading a lot, and want to get started on a build.

The general prospective plan is an action from a Savage 110 in 7mm RUM, with a Brux barrel, and a XLR chassis with a Leup Mark 4 FFP 6.5-20x50.

I'm told this will feed the 250 gr boolits from a mag..

Not trying to build on the cheap, but not looking to break the bank, either.

Thoughts?
Reply With Quote
  •   #2  
    Unread 07-10-2013, 08:30 AM
    Silver Member
     
    Join Date: Jul 2009
    Location: SW Missouri
    Posts: 161
    Re: 338 Edge build help

    Sounds like a great build. I'd try for the 300gr bergers. Seems most like those with 93gr h1000 seated .020 off the lands. My savage 338 build would put 5 under an inch at 300 yards. Not sure if they'll fit your magazine but I think wyatts or someone makes a longer setup.
    Reply With Quote

      #3  
    Unread 07-10-2013, 08:47 AM
    Silver Member
     
    Join Date: Jul 2009
    Location: SW Missouri
    Posts: 161
    Re: 338 Edge build help

    Sounds like a great build. I'd try for the 300gr bergers. Seems most like those with 93gr h1000 seated .020 off the lands. My savage 338 build would put 5 under an inch at 300 yards. Not sure if they'll fit your magazine but I think wyatts or someone makes a longer setup.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 09:26 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC