Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Chatting and General Stuff > General Discussion

General Discussion Must wear red or OD green socks to participate. I can't see your socks, please be honest.


What bedding?? Advice please ....

LinkBack Thread Tools Display Modes
Unread 01-11-2010, 07:44 PM
Junior Member
Join Date: Dec 2009
Posts: 2
What bedding?? Advice please ....

Fixing to start my first few steps building my 7mm Rem. Which way should i go for the best accuracy? Im not trying to shoot 1000 yard shots at whitetails here in NC, but would like a very accurate 500 to 600 yard gun. Should i go with a full aluminum bedded block or glass bead , pillar , steel or both pillar and steel ? Thanks for any suggestions..

Reply With Quote

Unread 01-11-2010, 08:10 PM
Silver Member
Join Date: Sep 2007
Location: Ogden, Utah
Posts: 249
Re: What bedding?? Advice please ....

To get the best accuracy possible you should do a proper pillar bedding job along with a bedding job on the action. I like to use aluminum pillars and then devcon steel bed for the bedding. This will provide a solid platform to work with. Also make sure the barrel is free floated. This, along with a good hand load tuned specifically for this rifle should get you maximum accuracy out of your setup.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: What bedding?? Advice please ....
Thread Thread Starter Forum Replies Last Post
Glass bedding vs. Pillar Bedding summitsitter The Basics, Starting Out 7 06-20-2013 01:09 AM
Bedding a stock with Aluminum bedding blocks? Atlas 00 Gunsmithing 1 07-20-2011 03:38 PM
BROWNING 78 Bedding Advice elkaholic Gunsmithing 11 01-21-2010 11:17 PM
First bedding project, need advice ukenout The Basics, Starting Out 9 11-14-2007 03:29 PM
Skim bedding an aluminum bedding block. Ankeny General Discussion 19 05-27-2006 10:07 PM

All times are GMT -5. The time now is 10:52 PM.

All content ©2010-2015 Long Range Hunting, LLC