Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Chatting and General Stuff > General Discussion

General Discussion Must wear red or OD green socks to participate. I can't see your socks, please be honest.


Reply

Testing and rezero the 6.5x284 and 308

 
LinkBack Thread Tools Display Modes
  #1  
Old 03-15-2004, 07:10 PM
Platinum Member
 
Join Date: May 2001
Posts: 2,369
Testing and rezero the 6.5x284 and 308

After I installed that bubble level thing on my 308 and 6.5x284 I reset the scopes and needed a re-zero (the better part of the exercise).

A trip up to WV to shoot and here's the result(s).

tada



G-A Precision M40A1 type 308. Fed GMM 168's, Leupold 3.5 x 10 M1 LR, Harris bipod and sand sock rear rest.

Confirmation three (3) shot group.



Fouling/bore sight and three (3) shot group.




Tac-Ord 6.5x284, Rem 700, Nikon 2.5x10 Tactical, Harris, sand sock.

142 Sierra MK in unfired brass, three (3) shot group.



140 Game King in once fired brass, fouling/bore sight and three (3) shot group.

Reply With Quote
  #2  
Old 03-15-2004, 08:00 PM
Silver Member
 
Join Date: Dec 2002
Location: Finland
Posts: 179
Re: Testing and rezero the 6.5x284 and 308

Nice! [img]images/icons/smile.gif[/img]

I especially like those vertical groups.
Reply With Quote
  #3  
Old 03-15-2004, 08:44 PM
Platinum Member
 
Join Date: May 2001
Posts: 2,369
Re: Testing and rezero the 6.5x284 and 308

Petander

Yeah, I think my shoulder pressure and placement on the rifle butt was a little inconsistent but the groups will do for a zero.
Reply With Quote
  #4  
Old 03-16-2004, 04:46 AM
Silver Member
 
Join Date: Dec 2002
Location: Finland
Posts: 179
Re: Testing and rezero the 6.5x284 and 308

Yeah, I guess you remember my whining about all the horizontal drift I had with that 338LM -until I eventually believed it was the bedding.

I got really allergic to horizontal drift then. [img]images/icons/mad.gif[/img]

Those groups of yours are what Id like to see on my targets ,its all shoulder and breathing re-work in my case, now that the drift is gone. Well my groups are 2 to 4 times bigger but still... they are consistant now and can only get better. [img]images/icons/grin.gif[/img]

Good shooting. [img]images/icons/smile.gif[/img]
Reply With Quote
  #5  
Old 03-17-2004, 04:00 PM
Bronze Member
 
Join Date: Oct 2003
Location: michigan
Posts: 36
Re: Testing and rezero the 6.5x284 and 308

I have a quick question about how you measure your groups i see that you got a .700 tho group then minus 308 is that how you (everybody measures them)

then i'm gonna start celebrating right about
now [img]images/icons/grin.gif[/img] [img]images/icons/grin.gif[/img]


cause i've always measured edge to edge and
never subtracted.
__________________
sdr
Reply With Quote
  #6  
Old 03-17-2004, 04:09 PM
Silver Member
 
Join Date: Sep 2002
Location: Colorado
Posts: 273
Re: Testing and rezero the 6.5x284 and 308

That is how I measure them. If not, even a 1 shot group would measure .308 (or whatever diameter bullet you shoot.
Some measure from outside to nearside of farthest bullet hole. This can give you a good idea, but when you get to groups as nice as Dave's, the outside to outside minus bullet diameter works great.
Reply With Quote
  #7  
Old 03-21-2004, 03:52 PM
Platinum Member
 
Join Date: May 2001
Posts: 2,369
Re: Testing and rezero the 6.5x284 and 308

Yup, like stated.

Measure the outside and subtract one bullet diameter to get a center-to-center measurement.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Testing and rezero the 6.5x284 and 308
Thread Thread Starter Forum Replies Last Post
7 RUM Testing daveosok Rifles, Bullets, Barrels & Ballistics 4 08-14-2014 07:06 PM
Changing from 168 SMK's to 175 SMK's (rezero or compensate) doctordoctor Long Range Hunting & Shooting 2 06-15-2011 08:20 AM
Do you need to rezero a scope if you significantly change elevation? teddy12b Long Range Hunting & Shooting 6 12-19-2007 09:36 PM
Testing RL 22 JD Reloading 9 03-31-2006 11:17 PM


All times are GMT -5. The time now is 07:45 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC