Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Chatting and General Stuff > General Discussion

General Discussion Must wear red or OD green socks to participate. I can't see your socks, please be honest.


Reply

Anybody tried using "poured" bedding pillers

 
LinkBack Thread Tools Display Modes
  #1  
Old 12-22-2006, 09:15 AM
Platinum Member
 
Join Date: Jul 2002
Posts: 2,856
Anybody tried using \"poured\" bedding pillers

I was thinking the other day about getting alot bigger front bedding piller for my Rem 700 ADL and the thought about using a poured in place bedding piller came to mind. I know they have been done before but was wondering if anybody here had any first hand dealing with this setup.
I have made a 1.25" SS cap thats gonna be inletted into the stock that will cover the bedding and counter sunk for the screw.

Anybody out their make their own bedding pillers contured to fit the Rem 700 action?
I'm planning to buy a 1.375" 6 flute carbide mill and have it cut down to 1.355" so I can make my pillers from SS or Titanium.
__________________
Si Vis Pacem Parabellum
Molon Labe
Reply With Quote
  #2  
Old 12-22-2006, 11:11 AM
Platinum Member
 
Join Date: Jun 2001
Location: Potomac River
Posts: 5,057
Re: Anybody tried using \"poured\" bedding pillers

Clay Spencer uses poured bedding pillars. He does not use a cap. The purpose of the poured pillar is to get a perfect fit. If you use a metal cap you defeat the purpose. This is his theory so if you have a different opinion that is fine with me. The gun shoots great, so I am a believer.
__________________
The Smokin Fur Rifle Club
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Anybody tried using "poured" bedding pillers
Thread Thread Starter Forum Replies Last Post
Bedding a stock with Aluminum bedding blocks? Atlas 00 Gunsmithing 1 07-20-2011 03:38 PM
How do you make 'poured' pillars? AJ Peacock Gunsmithing 12 08-17-2009 11:23 AM
alluminum vs. poured pillars devildoc The Basics, Starting Out 0 09-25-2007 09:19 PM
Is a bedding block better than pilar bedding pdbsa The Basics, Starting Out 8 06-20-2006 08:37 AM
Skim bedding an aluminum bedding block. Ankeny General Discussion 19 05-27-2006 10:07 PM

Current Poll
I currently have hunting preference points in the following states

All times are GMT -5. The time now is 03:29 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC