  | .30-cal-Barrel-Twist-question |
|

03-26-2007, 03:39 PM
|
|
Platinum Member
|
|
Join Date: Jul 2005
Posts: 1,651
|
|
|
Re: .30-cal-Barrel-Twist-question
Richard-recommends-a-.333-neck.-I-measured-my-necks-on-my
Norma-300-WSM-brass;-they-are-measuring-right-at-.335-so
it-want-be-to-bad-to-turn-down-to-.331-for-over-all-fit.
I-am-going-to-have-the-barrel-throated-for-the-125grn
Nosler-Ballistic-Tip-just-as-Richard-recommends.-I-am
also-going-to-use-Vhitivoria-N550-Powder.-From-what
I-have-been-reading-this-set-up-is-laser-accurate-out
and-destructive-on-varmints-out-to-1000-yards.-I-am
looking-forward-to-putting-this-one-togather.-It-will
be-one-of-those-rifles-that-no-one-has.-The-Nosler
125grn-Ballistic-Tip-has-a-BC-of-.366-and
traveling-at-over-4000-fps-it-will-be-awesome-out-to-1000
yards.-Once-again;-we-don't-have-that-much-wind-where
I-shoot-so-wind-wont-be-a-problem.-Anyhow;-it-will-be
different-from-the-norm;-and-I-know-it-is-going-to-
be-fast-and-accurate.-I-went-with-a-1-15-twist-barrel;-that
is-what-Richard-recommended-for-this-type-of-project.
Wildcat
|

03-26-2007, 05:32 PM
|
|
Platinum Member
|
|
Join Date: Jun 2007
Location: Fredericksburg VA
Posts: 3,844
|
|
|
Re: .30-cal-Barrel-Twist-question
good luck, let us know how it works out
BH
|

04-02-2007, 07:41 AM
|
|
Gold Member
|
|
Join Date: Apr 2003
Location: North Bend, Oregon
Posts: 938
|
|
|
Re: .30-cal-Barrel-Twist-question
Why not kick it up a notch to the 300RUM? I just can't warm up to those goofy short mags.
__________________
"Only accurate rifles are interesting".
|

04-02-2007, 10:23 AM
|
|
Platinum Member
|
|
Join Date: Nov 2005
Posts: 1,069
|
|
|
Re: .30-cal-Barrel-Twist-question
FWIW, I shoot 150 grain 0.308 AccuBonds from a 1:14 twist at about 3150 fps and have no problems with twist.
edge.
|

04-02-2007, 03:21 PM
|
|
Platinum Member
|
|
Join Date: Jul 2005
Posts: 1,651
|
|
|
Re: .30-cal-Barrel-Twist-question
Thats good to know. I have heard I will be able to shoot bullets up to 155grns if need be.
Jake
|

04-02-2007, 03:24 PM
|
|
Platinum Member
|
|
Join Date: Jul 2005
Posts: 1,651
|
|
|
Re: .30-cal-Barrel-Twist-question
Hired gun, I thought about going with the 300 RUM. Here are the reasons I did not go with the 300RUM;
1. No good brass for 300RUM
2. To much recoil
3. The smaller .30cal bullets are working better out of the 300-WSM.
Jake
|
  |
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Similar Threads for: .30-cal-Barrel-Twist-question
|
| Thread |
Thread Starter |
Forum |
Replies |
Last Post |
|
Barrel twist question?? 7WSM / 180 Bergers
|
Ryan55555 |
Rifles, Bullets, Barrels and Ballistics |
6 |
11-03-2010 10:03 PM |
|
Barrel twist Question
|
texasmeathunter |
Long Range Hunting & Shooting |
2 |
09-12-2010 04:52 PM |
|
question on barrel twist
|
mrbb |
Rifles, Bullets, Barrels and Ballistics |
9 |
01-22-2010 10:21 PM |
|
which break, barrel length, barrel cotour, and twist?
|
nathank |
Rifles, Bullets, Barrels and Ballistics |
1 |
02-03-2009 07:31 PM |
|
Barrel twist question
|
jedlowe |
Rifles, Bullets, Barrels and Ballistics |
1 |
12-19-2007 08:42 PM |
|
|
All times are GMT -5. The time now is 04:33 PM.