Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

Yet another barrel break in process

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-23-2008, 07:51 PM
Gold Member
 
Join Date: Apr 2006
Location: Alberta
Posts: 856
Yet another barrel break in process

Found this on youtube. Seemed to work for him.

YouTube - Proper Barrel Break-in Procedure
Reply With Quote
  #2  
Old 04-23-2008, 09:14 PM
Silver Member
 
Join Date: May 2007
Location: Alabama
Posts: 157
Probably breaking it in for his brother-in-law:eek:

David
Reply With Quote
  #3  
Old 04-23-2008, 11:33 PM
Platinum Member
 
Join Date: Jan 2004
Location: Blackfoot, Idaho
Posts: 8,176
On an honest note: If a/the rifle won't hack that kind of treatment it ought not ever be used for LRH. Just my IMHO.

I unexpectedly tripped in a low spot where there shouldn't have been one and went down like a ton of bricks. Broke a leg off of the bipod (which BTW was redesigned to handle that kind of stuff). The bipod was also torn from the fore end (that's been remedied also). This happened early in the season and I never even tho't of or considered checking zero.

However, after no shot presented itself at an animal, after the season I went to the range and things were spot on. Pretty much luck this time. But I'm working on remedies/prevention.
__________________
I may be the slowest guy on the mountain . . . . but . . . . I'm on the mountain!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Yet another barrel break in process
Thread Thread Starter Forum Replies Last Post
Barrel Break-In Eleazar Rifles, Bullets, Barrels & Ballistics 23 02-23-2012 07:12 AM
SST Barrel Break-in Mike6158 Rifles, Bullets, Barrels & Ballistics 2 10-18-2009 10:24 PM
which break, barrel length, barrel cotour, and twist? nathank Rifles, Bullets, Barrels & Ballistics 1 02-03-2009 08:31 PM
New barrel break-in help esshup Rifles, Bullets, Barrels & Ballistics 5 12-27-2008 10:45 PM
Barrel cleaning process? BIG DOG Rifles, Bullets, Barrels & Ballistics 10 08-18-2008 06:59 PM


All times are GMT -5. The time now is 10:13 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC