Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

What's going on?

 
LinkBack Thread Tools Display Modes
  #1  
Old 06-08-2003, 03:54 PM
Bronze Member
 
Join Date: May 2003
Location: Wausau, WI
Posts: 47
What\'s going on?

I need some help with this please. I have a 300 RUM in a model 700 SF with a 6.5 to 20 Nikon. I am shooting 165 Gr. Gamekings. During my load testing today with 88 Gr. of Rl-22 I shot 1" horizontal but 3" vertical. When I moved to 89 Gr. I shot 3.5" horizontal and 2.25" Vertical. I trimmed all the cases .010 from max. I deburred the flasholes but I did notice a burr on the outside of the chamfer. [img]images/icons/confused.gif[/img]
__________________
Follow the 7 p's and everything will be alright
Reply With Quote
  #2  
Old 06-08-2003, 06:14 PM
Bronze Member
 
Join Date: May 2003
Location: Alabama
Posts: 99
Re: What\'s going on?

This is so basic I am sure you have already done this, but just in case......Check your action screws and the position of your action in your stock. If you need to retorque the screws hold the action as hard to the rear as you can and torque the front screw completely then the rear one.
__________________
Rapid fire is the crutch of an incompetent marksman. ONE SHOT, ONE KILL
Reply With Quote
  #3  
Old 06-09-2003, 10:19 AM
Silver Member
 
Join Date: Mar 2003
Location: Schofield, WI.
Posts: 323
Re: What\'s going on?

Craig, I feel like I live right down the road from you. Thats an SF model as in Stainless fluted, so you have an HS stock on that rifle, when you torque your guard screws, do them alternatly, finishing with the rear, 65inlbs. I'll be at the range WED. if its not windy, I'll be shooting the VS 223 and my sons SF 22-250, we'll see if we can figure it out, or give me a call, I'll be home all night long, I'm in the book. Jay.
Reply With Quote
  #4  
Old 06-09-2003, 02:53 PM
Bronze Member
 
Join Date: May 2003
Location: Wausau, WI
Posts: 47
Re: What\'s going on?

Thanks guys for the help I will check the screws and see if that is the problem. I hope it is but, I have the feeling in the back of my mind that it is several little things. Jay I will try to be at the range on Wed. I have to load some more rounds. If I am there I will be there around 5

Craig
__________________
Follow the 7 p's and everything will be alright
Reply With Quote
  #5  
Old 06-09-2003, 03:43 PM
Silver Member
 
Join Date: Mar 2003
Location: Schofield, WI.
Posts: 323
Re: What\'s going on?

I'll be the one in the Tan Ranger looking on the skinny side and poor vision, but shootin' oneholers, in my dreams. Jay
Reply With Quote
  #6  
Old 06-09-2003, 03:53 PM
Silver Member
 
Join Date: Mar 2003
Location: Schofield, WI.
Posts: 323
Re: What\'s going on?

Craig, BTW, What is your cleaning regimine? I put a couple of patches of Shooters Choice #7, then go in with the bronze brush a few times, dry patch, then comes the Sweets a couple times, bronze brush again, dry patch, and then a patch of Kroil, and 2 dry patches. Jay
Reply With Quote
  #7  
Old 06-09-2003, 11:55 PM
 
Posts: n/a
Re: What\'s going on?

We have had the best results with HS stocks by torqueing the front screw to 55 in. lbs. and the rear to 45 in. lbs. [img]images/icons/smile.gif[/img]
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 03:02 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC