Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


TRG-S 338 LM Bedding Fix Report

LinkBack Thread Tools Display Modes
Unread 05-27-2004, 01:49 AM
Junior Member
Join Date: May 2004
Location: Casper, WY
Posts: 12
Re: TRG-S 338 LM Bedding Fix Report

Hi. I am new to this forum. I have a TRG-S in 300 WBY. It has a 3-9 Swarovski on it with sako rings and bases. I have gone to the Sako website, and it seems they no longer chamber the TRG-S in 300 WBY, but they did when I bought mine in 1994. I have never been overly satisfied with its accuracy. I have come across threads here speaking of a recoil lug problem that I was not aware of.
How did you get so much space between the barrel and the stock? Can you just sand it away. I would like a bit more space there, but don't need that much, as I don't use a bipod. Any recomendations on a way to make my rifle more accurate would be appreciated. Is there a good way to bed the rifle yourself? I guess what I have read on these forums regarding the TRG-S combined with my loss of the initial confidence I had in my rifles accuracy, has left me disheartened.
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: TRG-S 338 LM Bedding Fix Report
Thread Thread Starter Forum Replies Last Post
Glass bedding vs. Pillar Bedding summitsitter The Basics, Starting Out 7 06-20-2013 01:09 AM
Bedding a stock with Aluminum bedding blocks? Atlas 00 Gunsmithing 1 07-20-2011 03:38 PM
Is a bedding block better than pilar bedding pdbsa The Basics, Starting Out 8 06-20-2006 08:37 AM
Skim bedding an aluminum bedding block. Ankeny General Discussion 19 05-27-2006 10:07 PM

All times are GMT -5. The time now is 09:17 AM.

All content ©2010-2015 Long Range Hunting, LLC