Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Trajectory validation ( Exbal )

LinkBack Thread Tools Display Modes
Unread 08-28-2009, 03:19 AM
Silver Member
Join Date: May 2008
Location: Sydney , Australia
Posts: 187
Trajectory validation ( Exbal )

When using this function on my PDA i type in the target distance and then when i go to sight adjustment used it comes up not in moa but with a hole number . All my settings are in Moa so i dont understand it .
If i pay no attention to the SAU number and input a +/- coorection it works and adjusts my velocity and drop chart but this number in the SAU value shits me

Any ideas
Thanks Andrew

Target distance-------------------------Sight Adj Used------------------------------Impact poitn +/-
800m-------------------------------------- 3.042???????

----------------------------------------------(moa is 18.25)

240 Wby85 gr tsx, 3452 fps, Bc .333, 0@200m

Last edited by JAWZ; 08-28-2009 at 03:22 AM.
Reply With Quote

Unread 08-28-2009, 04:39 AM
Gold Member
Join Date: May 2007
Posts: 912
Re: Trajectory validation ( Exbal )

CAll me tomorrow and I'll explain that. It shits me too

With each step in the bush, you are a step closer.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Trajectory validation ( Exbal )
Thread Thread Starter Forum Replies Last Post
Trajectory validation? curiousaussie Long Range Hunting & Shooting 8 06-12-2011 05:22 PM
Trajectory Validation ?? hodgehodge Long Range Hunting & Shooting 10 07-14-2009 08:23 AM
Trajectory validation jmason Long Range Hunting & Shooting 9 05-30-2009 09:31 AM
trajectory validation trueblue Reloading 2 11-25-2008 10:17 PM
Exbal Question ?? Trajectory Validation Down Under Hunter Rifles, Bullets, Barrels & Ballistics 4 06-08-2008 10:07 PM

All times are GMT -5. The time now is 04:06 AM.

All content ©2010-2015 Long Range Hunting, LLC