Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


T C Dimension

LinkBack Thread Tools Display Modes
Unread 11-28-2013, 05:45 PM
Junior Member
Join Date: Nov 2013
Posts: 10
T C Dimension

My son has an opportunity to pick up a new TC Dimension in 7mm-08.
What does anyone know about the accuracy / quality of this rifle?
I own a TC Venture 270 WSM and have had great success getting it to shoot well under 1" @100yds. Do you think this Dimension will be a decent shooter?
I appreciate all input.
Reply With Quote

Unread 11-30-2013, 04:37 PM
Junior Member
Join Date: Nov 2013
Posts: 10
Re: T C Dimension

Well, he picked up this rifle and we loaded up 4 different powders using 120 grain Noslers to break in barrel. This was also to start looking at a load for my grandson to use for deer hunting when he gets big enough.

5 rounds each:
40 gr/RL15
39 gr/IMR 4350
39 gr/IMR 4895
39 gr/IMR 4064

5 rounds with cleaning intervals on each group @ 100 yds. in sequence of break-in:
RL 15 group -1.5"
4350 group - 1.25"
4064 group - 1"
4895 - .75"

Trigger has some creep, but easy to learn where it was going to snap.
Bolt is not the easiest to remove / replace.
Comb is a bit high for my liking,made it hard to get down on scope with glasses.

All things considered I think this rifle will be a good shooter once we find the load it likes best. Definitely good enough for hunting deer in Pa.

Reply With Quote


Thread Tools
Display Modes

All times are GMT -5. The time now is 08:54 PM.

All content ©2010-2015 Long Range Hunting, LLC