Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


so what are my options?

LinkBack Thread Tools Display Modes
Unread 08-05-2011, 08:00 PM
Bronze Member
Join Date: Jul 2011
Posts: 40
so what are my options?

I picked up a b&c for my feather weight model 70 in 300 wsm

The problem is the bottom metal cut out is for a 1 piece and the gun is a two piece. We put a spacer under the end screw, which allows it to function. But it has a gap at the bottom of the plate.

question is, is it possible and where can I purchase the a 1 piece bottom metal to fit this gun?

i have looked at badger ordinance and other like after market mags and don't want to put the money in them, plus don't need the extra weight, since the whole idea of this rifle was to keep it light.

any help would be appreciated.
Reply With Quote

Unread 08-05-2011, 09:03 PM
Platinum Member
Join Date: Jan 2011
Posts: 2,206
Re: so what are my options?

Reply With Quote


Thread Tools
Display Modes

Similar Threads for: so what are my options?
Thread Thread Starter Forum Replies Last Post
Options for mod 70 pre 64 ryanf73 The Basics, Starting Out 16 03-22-2011 06:29 PM
Options for an old Rem 721 30-06? blackdog Rifles, Bullets, Barrels & Ballistics 18 02-28-2011 06:08 PM
6mm options stifle Rifles, Bullets, Barrels & Ballistics 12 01-21-2008 04:10 PM
barrel options Olio Tutto Rifles, Bullets, Barrels & Ballistics 21 11-14-2007 05:05 AM
Gun Options....What would you do? Archeryelk Long Range Hunting & Shooting 5 01-09-2006 06:51 PM

All times are GMT -5. The time now is 04:07 AM.

All content ©2010-2015 Long Range Hunting, LLC