Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


seat depth

LinkBack Thread Tools Display Modes
Unread 01-29-2004, 02:47 PM
Bronze Member
Join Date: Jan 2004
Location: Austin, Texas
Posts: 75
Re: seat depth

Dave hit it right on the money. This is pretty much the way I do it as well. Pressure will build faster if the bullet is right on the lands as you will have no bullet "jump" to relieve a small amount of pressure in the case and you may see some minor extraction problems. Best way to avoid is to reduce the charge when seating in the lands and increase to recommended levels as you pull back off the lands. Good luck.

Reply With Quote



Thread Tools
Display Modes

Similar Threads for: seat depth
Thread Thread Starter Forum Replies Last Post
Bullet seat depth Gone Ballistic Reloading 5 04-19-2011 03:27 PM
200gr accubond - where do you like to seat them? LRHWAL Rifles, Bullets, Barrels & Ballistics 7 03-15-2011 06:58 PM
How far do I seat off the lands? orangeride Reloading 1 01-28-2011 06:02 PM
Where do you seat your 300 SMK's Broz Reloading 3 04-19-2009 08:29 AM
bullet seat depth Rifles, Bullets, Barrels & Ballistics 2 03-13-2003 01:32 PM

All times are GMT -5. The time now is 09:06 AM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC