Savage 11/111 338 lapua case sticking problems

[med7mmstw]

New savage having problems with hornady factory ammo sticking in chamber.Savage took gun back and could not find any problem but did polish chamber have not had any problems with lapua brass i have reloaded except once before chamber was polished but hornady brass is still getting stuck.Savage told me to only use black hills ammo whats up with this. hornady has been very helpful in trying to help with this problem any other thoughts .This gun shoots great . But no real answer as to why cases keep getting stuck. ANY HELP WOULD BE GREAT

[barnesuser28]

the hornady brass is too soft and expands to your chamber too tightly. i had the same problem with my savage 110 fcp hs in 338 Lapua then i reloaded some lapua brass and now everything is fine.

[med7mmstw]

Thanks I hope this was problem but 1 Lapua got stuck fired about 50 rounds so far that was before chamber was polished .This has been going back and forth for about 2 mths now getting frustrated doesnt take much to bump case out but my buddy bought same gun and is having same problem. any thing else i could check

[med7mmstw]

Have u ever tried barnes lrx 265gr 338 bullets

[barnesuser28]

is bolt lift sticky at all? that would be a sign of over pressure and that could cause the brass to get stuck. are you using factory ammo?

[barnesuser28]

no but i have two boxes of 280 grain lrx showing up tomorrow

[barnesuser28]

some people have been having great luck at .100 off the lands