close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

Rifle ID

LinkBack Thread Tools Display Modes
  #1  
Unread 02-03-2013, 08:40 PM
Bronze Member
 
Join Date: Sep 2010
Posts: 30
Rifle ID

So Im told it is a Hart, however but this marking is odd


Any thoughts
Attached Thumbnails - Click to View Larger
Rifle ID-dscf0660.jpg  
Reply With Quote
  •   #2  
    Unread 02-03-2013, 08:55 PM
    Platinum Member
     
    Join Date: Dec 2001
    Location: Potters Hill, NC
    Posts: 1,688
    Re: Rifle ID

    My eyes are getting bad!


    Too blurry man, can't make it out. JohnnyK.
    __________________
    "The only thing necessay for the triumph of evil is for good men to do nothing."
    Reply With Quote

      #3  
    Unread 02-03-2013, 09:08 PM
    Bronze Member
     
    Join Date: Sep 2010
    Posts: 30
    Re: Rifle ID

    here it is drawn out, not the easiest thing to take a picture of...or draw
    Attached Thumbnails - Click to View Larger
    Rifle ID-dscf0664.jpg  
    Reply With Quote
      #4  
    Unread 02-03-2013, 09:14 PM
    Gold Member
     
    Join Date: May 2009
    Posts: 746
    Re: Rifle ID

    It could be an old CZ , Česká zbrojovka marking . A barrel does not necessarily identify an action and vicer versa .
    Need photos of the whole gun . The recoil lug and front screw position looks ala Mod 70 Winchester .
    From the marks on the barrel I would say it has been removed and replaced by an amature.
    Reply With Quote
      #5  
    Unread 02-03-2013, 09:32 PM
    Bronze Member
     
    Join Date: Sep 2010
    Posts: 30
    Re: Rifle ID

    Quote:
    Originally Posted by Bullet bumper View Post
    It could be an old CZ , Česká zbrojovka marking . A barrel does not necessarily identify an action and vicer versa .
    Need photos of the whole gun . The recoil lug and front screw position looks ala Mod 70 Winchester .
    From the marks on the barrel I would say it has been removed and replaced by an amature.

    My bad, it is a win model 70 pre 64, the ID was for the barrel. It looks alot like a hart barrel but I am trying to determine if it is true. It appears to be an older barrel, Seems trued to the action and doesn't look botched IMO
    Reply With Quote
      #6  
    Unread 02-03-2013, 10:05 PM
    Gold Member
     
    Join Date: May 2009
    Posts: 746
    Re: Rifle ID

    From the collet clamping scratch marks I would say it has been at least fitted by someone not so skilled in gunsmithing. However the threading and chambering might be ok , it's impossible to say.
    Rifling profile might tell you something if it's not too worn . Hart barrels were button rifled.
    Reply With Quote
      #7  
    Unread 02-03-2013, 10:49 PM
    Platinum Member
     
    Join Date: Jul 2004
    Location: Texas
    Posts: 6,921
    Re: Rifle ID

    The cartouche is definitely not a Hart marking.

    Early on when most companies did not have good luck with making Stainless barrels they used
    Hart barrels that were marked with a heart shaped cartouche.

    But if a gunsmith installed it It could be a Hart with his proof mark.

    If it was factory installed it will have proof marks and the factory logo on it.

    J E CUSTOM
    __________________
    "PRESS ON"
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes



    All times are GMT -5. The time now is 05:38 PM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC