Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

Rifle build

 
LinkBack Thread Tools Display Modes
  #1  
Old 01-27-2010, 10:55 PM
Bronze Member
 
Join Date: Jan 2007
Location: Lewiston, Idaho
Posts: 87
Rifle build

I am going to have a 7mm Remington Magnum built within the next six months but I am still torn on an idea. I want to get a few other opinions on the situation before I spend the money. Ok I am ordering the barrel within the next week and it will be a 26in fluted #5 lilja and the stock will most likely be a HS sporter (as long as it doesn’t have a palm swell) but neither of these items is where im having a problem. I am torn between actions; Either a Remington or a stiller predator. I know that the stiller action is a great action but my concern is that is it necessary to build a hunting rifle on a stiller over the Remington.
Reply With Quote
  #2  
Old 01-28-2010, 01:56 AM
Platinum Member
 
Join Date: Dec 2009
Location: 44°22′44″N 108°2′35″W
Posts: 3,997
Re: Rifle build

Not at all the 700 action is more than capable of handeling what you wan to do with it. IMO its all you need for any long action build even for bench rest. It is stron and dependable and proven. and lots of aftermarkets for it.
__________________
Mike

Get a JOB! I already feed the bears, I dont need to feed you too!

" Real elk guns start with the number 3 or bigger and blow two holes, one in and one out." - My Dad
Reply With Quote
  #3  
Old 01-28-2010, 10:31 AM
Bronze Member
 
Join Date: Aug 2008
Posts: 92
Re: Rifle build

Nothing wrong with the 700 action especially if you already have a donor action or find a good deal on one. Just make sure to get it trued by a quality smith. With that said in most cases the cost when starting from scratch is close between a trued 700 and the Stiller especially if you flute the bolt. When starting from scratch the custom is the way to go. You might also want to check out the Surgeon round action. There is a group buy going on over at sniper hide forum. Either way you go you will be happy.

Dan
Reply With Quote
  #4  
Old 01-28-2010, 10:47 AM
Bronze Member
 
Join Date: Jan 2007
Location: Lewiston, Idaho
Posts: 87
Re: Rifle build

I dont have a rifle to build on yet so this will be from scratch. I know the stiller is going to be right around 1000 with a trigger and lower metal. any ideas on what it will be to tune a rem action saying the donor gun will be around 400
Reply With Quote
  #5  
Old 01-28-2010, 11:01 AM
SPONSOR
 
Join Date: Mar 2004
Location: Danville, PA
Posts: 1,083
Re: Rifle build

I agree with djbwow2008. If you already own a Remington 700 long action and your willing to use it as a donor action than you have everything you need. But if you don't have an action as of yet a custom may be more in line price wise. Here's a brief comparison.

You already own the Remington 700 with bottom metal and factory trigger. All you really need is to have the action blueprinted and done right ($150). Have the factory trigger tuned ($25) or replace it with a jewel ($225). Holland recoil lug ($40). This is assuming the bolt face is already a magnum and you don't need to open it up and have a sako extractor installed. This way you'll spend between $215 and $415. If you had to go out and buy a Remington 700 say an SPS you'd spend about $550. Now your up to between $765 with a factory trigger and $965 with a jewel trigger.

Now if you go with a Stiller predator your cost would be about $825 no trigger and no bottom metal but you get a good recoil lug. You'll spend another $225 for a jewel trigger and depending on which bottom metal you choose between $125 for a factory floorplate and magazine box up to $400+ for all badger stuff. So now your up to between $1175 and $1450 if you go with a Stiller predator.

The closeness is if you had to go out and buy a Remington, have it blueprinted, use a jewel trigger, Holland recoil lug and factory floorplate and magazine. Cost would be about $965

If you bought a Stiller Predator, used a jewel trigger, Remington factory floorplate and magazine it would cost you about $1175.

A difference of $210 and you've got yourself a custom action that will hold its value better than a Remington will.

There are different ways to spin the numbers depending what components you plan on using. Best thing is to figure all them out, price it out and see which ones suits your needs better.
__________________
Home of the "EXTENDED IMPACT" DVD

www.mcrifles.com
Reply With Quote
  #6  
Old 01-28-2010, 11:54 AM
Bronze Member
 
Join Date: Jan 2007
Location: Lewiston, Idaho
Posts: 87
Re: Rifle build

Thank you this is great information. Who else makes good peices of bottom metal? Im looking at a timney trigger too, and input?
Reply With Quote
  #7  
Old 02-05-2010, 02:08 AM
Gold Member
 
Join Date: Jun 2007
Location: BLOOMSBURG, PA
Posts: 896
Re: Rifle build

I have a Timney in one of my rifles and while others may disagree I wouldn't buy another. Stick with rifle basics or Jewel like kevin recommended.

You can't go wrong with either
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Rifle build
Thread Thread Starter Forum Replies Last Post
help...rifle build htime8 Long Range Hunting & Shooting 2 09-20-2010 09:04 AM
rifle build saskhunter Rifles, Bullets, Barrels & Ballistics 6 03-19-2010 08:04 PM
Rifle Build 340ORHNTR Long Range Hunting & Shooting 20 01-18-2010 09:43 PM
rifle build, can it get better? Retusmce7 Rifles, Bullets, Barrels & Ballistics 0 02-13-2009 12:32 AM
help me build a rifle msalm Gunsmithing 14 08-13-2007 06:07 PM


All times are GMT -5. The time now is 01:14 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC