Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Remington issues

LinkBack Thread Tools Display Modes
Unread 03-10-2013, 06:42 AM
Junior Member
Join Date: Jan 2013
Posts: 3
Re: Remington issues

If you fire 168 an 175 s thru your heavy barrel and your still haviing problems id check that my rifle is torqued to spec an .that my barrel is floated all the way thru .I just went thru this problem at the range it turned out to be my sighting set up.to tell the truth I was stumped, I gave the rifle to the range master along with a 20.came back 30minutes later an the rifle now shoots 3 shot groups the size of a dime.the rifle has a krieger 24 in barrel an a oversize recoil lug a jewel trigger set at 1pd.I woudnt bother with anything smaller than 168 in this gun.considering the fact that I couldnt get it on paper and all he did was sight it in id start there if all else is tight.
Reply With Quote



Thread Tools
Display Modes

All times are GMT -5. The time now is 04:04 PM.

All content ©2010-2015 Long Range Hunting, LLC