close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

rebarreling sendero sf ?

LinkBack Thread Tools Display Modes
  #1  
Unread 11-09-2003, 11:55 AM
Silver Member
 
Join Date: Dec 2001
Location: bluefield,va,us
Posts: 337
rebarreling sendero sf ?

338 rum has anybody run into the problem of the threads getting galled .if it happens where could a person find a new rem 700 action for the 338 rum,thanks,keith
__________________
keith
Reply With Quote
  •   #2  
    Unread 11-10-2003, 12:41 AM
    Silver Member
     
    Join Date: Jul 2002
    Location: France
    Posts: 390
    Re: rebarreling sendero sf ?

    If galling is not deep ( smash thread or pull of thread ) and if that the factory thread in original dia , that perhaps possible to rethread bigger with a single point tool on a lathe to get something clean as soon as you stay in 16 thread /inch ...
    you can too rebore to remove the top of the thread ( V thread ) and rethread in square thread to completely clean the thread faces

    I have never galle REM thread , only M98 with very tight factory barrelfitting .

    good shooting

    DAN TEC

    [ 11-09-2003: Message edited by: DANTEC ]
    __________________
    DANTEC
    Reply With Quote

      #3  
    Unread 11-13-2003, 05:38 PM
    Bronze Member
     
    Join Date: Aug 2001
    Location: Del Rio TX
    Posts: 38
    Re: rebarreling sendero sf ?

    It should not matter if they gaul a little if you are going to rebarrel, since the threads in the action will be trued anyways.

    the only time I ever have seen threads get damaged on a Remmy of any kind is when someone forgot to take the plug screw out of the first base hole. It was in far enough to rub on the barrel threads. Both barrel and action threads suffered for this, but when the acion wa trued, it didnt make any differance.

    celt
    __________________
    H.D. Rifles
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: rebarreling sendero sf ?
    Thread Thread Starter Forum Replies Last Post
    Rebarreling 25-06...8mm Rem. Mag Idaho Shooter Gunsmithing 5 09-27-2010 09:06 PM
    Rebarreling to 280 AI BH Hunter Long Range Hunting & Shooting 3 10-31-2009 09:09 PM
    rebarreling .308 foreign Gunsmithing 6 10-02-2008 03:34 PM
    Rebarreling a 721 swebb38 Rifles, Bullets, Barrels & Ballistics 5 08-02-2007 09:14 AM
    Rebarreling .22/250 for 6.5-284 tunofun Long Range Hunting & Shooting 2 08-19-2004 03:40 AM


    All times are GMT -5. The time now is 12:38 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC