close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

Re-chambering recommendations for 7mm Mauser

LinkBack Thread Tools Display Modes
  #8  
Unread 07-04-2006, 07:06 PM
Bronze Member
 
Join Date: Apr 2006
Posts: 54
Re: Re-chambering recommendations for 7mm Mauser

After ten years in the back of the safe with a broken Canjar trigger this gun was finally shot again this morning.

With 162gr A-Max and some of my old horde of DuPont IMR 4831 and the 3-9x Weaver off my -06 it shot just over 1/2" at 100 yards using a Harris bipod and an improvised rear rest. Not to shabby.

Things I learned today. 1) I don't like the Timney that is on it now as much as the old Canjar. 2) My shooting technique is really rusty after 10 years playing with shotguns.

Good fun though. Seven rifles went to the range along with my XP and Contender. Single projectile firearms are still fun!
Reply With Quote
  • Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Re-chambering recommendations for 7mm Mauser
    Thread Thread Starter Forum Replies Last Post
    chambering help fisherman98 Rifles, Bullets, Barrels & Ballistics 3 11-23-2010 08:11 AM
    B-78 chambering help elkaholic Gunsmithing 6 11-06-2009 09:22 PM
    Re chambering DONTSTROKEME Rifles, Bullets, Barrels & Ballistics 2 01-05-2007 11:06 AM
    7mm RM chambering help 11B2CV Reloading 9 12-12-2006 10:10 PM
    Which chambering? philip h The Basics, Starting Out 1 03-20-2005 10:11 PM


    All times are GMT -5. The time now is 01:53 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC