Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


re-barrel 300 wsm questions

LinkBack Thread Tools Display Modes
Unread 10-30-2011, 02:44 PM
Junior Member
Join Date: Oct 2011
Posts: 1
re-barrel 300 wsm questions

I am looking to have a Sako 75 re-barreled. It is and will remain a 300 wsm. It has a McMillan stock that was properly bedded and good optics and mounts. I say this because it doesn't shoot all that well. It is the Finnlight which I hear often don"t shoot well. I wish I would have known that before I bought it! Anyway, I am going to have it re-barreled and have pretty much decided between a Lilja which will be installed by Mark Penrod at Penrod Precision....which is close to my home or a Hart barrel installed by Hart. The price will be about the same except for the shipping to Hart. I am leaning towards Hart now after thinking that if a mistake or problem would arrise it would go back to Hart as they would do all the work. Not that I expect Penrod or Lilja to make a mistake but at least that would prevent one pointing to the other if a problem did arrise. Thoughts....suggestions.........??? also what crown should I have recessed , 11 degree? specs: aprox #4 contour 416 ss, 24" plain barrel
Reply With Quote



Thread Tools
Display Modes

Similar Threads for: re-barrel 300 wsm questions
Thread Thread Starter Forum Replies Last Post
Switch Barrel questions MSU Marksman Gunsmithing 3 08-27-2010 04:48 AM
7mm STW Barrel Questions aroshtr Rifles, Bullets, Barrels & Ballistics 6 05-17-2008 10:22 AM
New barrel questions Preda8or Rifles, Bullets, Barrels & Ballistics 1 03-06-2008 02:13 AM
Barrel questions Diezel Rifles, Bullets, Barrels & Ballistics 3 12-11-2007 08:54 PM
.25-06 Barrel Questions blong Rifles, Bullets, Barrels & Ballistics 6 01-15-2005 01:19 AM

All times are GMT -5. The time now is 07:22 AM.

All content ©2010-2015 Long Range Hunting, LLC