Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

Quickload help please

 
LinkBack Thread Tools Display Modes
  #1  
Old 02-28-2009, 06:16 PM
Lightvarmint
 
Posts: n/a
Quickload help please

Hello,

We shot H-1000 today for the first time and it was raining. I could not chronograph anything. If someone could run the numbers, I would appreciate it. Or even better, if someone has any data or data close to this it would help also.

300 Dakota
23.5" barrel
81 grains h1000
210 grain bullet

Thanks in advance

James
Reply With Quote
  #2  
Old 02-28-2009, 06:31 PM
Platinum Member
 
Join Date: Oct 2005
Location: Michigan
Posts: 2,232
Re: Quickload help please

2920fps

65710psi vs a recommended max of 59465psi

COAL was 3.330"

210gr Berger VLD

81gr H1000

23.5" barrel

70 degrees F


AJ
__________________
If some is good and more is better, then too much is just right.


My mind is a raging torrent, flooded with rivulets of thought, cascading into a waterfall of creative alternatives
Reply With Quote
  #3  
Old 03-13-2009, 06:51 PM
Bronze Member
 
Join Date: Oct 2005
Location: Florence Italy
Posts: 59
Re: Quickload help please

James, I need of know wich bullets is ( berger? Sierra?) and AOL of your cartridge

Lorenzo
Reply With Quote
  #4  
Old 03-13-2009, 09:59 PM
Lightvarmint
 
Posts: n/a
Re: Quickload help please

Quote:
Originally Posted by lorvan View Post
James, I need of know wich bullets is ( berger? Sierra?) and AOL of your cartridge

Lorenzo
Hello Lorenzo,

Thanks for the response and the willingness to help.

AJ has been running the numbers for me. We got the data tweeked about as much as one can do it without the chronograph. The loaded case is very long and the latest data indicates that about 86 grains (+ or -) of H1000 with the HAT 210 grainer (much higher BC than Berger or Sierra) is the limit. We will minutely adjust seating depth to tune the loads.

The pistol is a beast and it really gets your attention. However, due to the Holland's brake, it recoils with full house loads between a model 41 S&W 22LR and a 38 special. The bystanders were amazed at the minimal recoil.

Once the bone heals up in the foot, I will be able to take all the equipment to the range. As for now, I am just limited to shooting groups off of a club bench.

I can't wait until I can start using my personal bench again. It is just too heavy to carry and assemble on one foot without messing up the bone again....

Thanks again.

James
Reply With Quote
  #5  
Old 03-15-2009, 04:22 AM
Bronze Member
 
Join Date: Oct 2005
Location: Florence Italy
Posts: 59
Re: Quickload help please

ok James.. consider that the calculated speed is higher than about 100 fps of those measured with a cronographer. I do not know why but all the pressure and velocities are calculated always higher than real, I imagine for security reasons .
Good shooting


Lorenzo
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Quickload help please
Thread Thread Starter Forum Replies Last Post
Quickload help please handle Reloading 0 03-06-2011 09:39 AM
Some Quickload help Please !! Murph Rifles, Bullets, Barrels and Ballistics 15 06-11-2009 06:29 PM
Quickload help? friendlyfireisnt Reloading 2 04-27-2009 08:36 PM
Could someone with quickload help me? justramit Reloading 1 04-06-2009 06:36 PM
Quickload ? edge Reloading 2 03-04-2009 10:59 AM

Current Poll
Are you on Facebook?
Yes - 46.79%
1,085 Vote
No - 19.23%
446 Votes
No, but I may join - 1.77%
41 Votes
No way, are you kidding? - 35.96%
834 Votes
Total Votes: 2,319
You may not vote on this poll.

All times are GMT -5. The time now is 11:43 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC