Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

primer pocket uniforming question???

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-14-2003, 09:28 AM
Silver Member
 
Join Date: Sep 2002
Posts: 453
primer pocket uniforming question???

If I use the RCBS uniformer for my 280AI cases, do I twist the cutter in the pocket recess until no shavings exist, thus making sure that each case has the same depth primer pocket? I have simply twisted them until they were bright and clean inside, but upon using the latter method this weekend, i noticed much more material being removed from some cases than others. Did I finally do it correctly, and therefore possibly solve my "flyer" problem? If this is incorrect, can someone help me to get as close to exact as I can with the pockets and the uniformer?

Thanks
__________________
You try to get closer to the target,..and I keep trying to get further away.
Reply With Quote
  #2  
Old 04-14-2003, 10:02 AM
 
Posts: n/a
Re: primer pocket uniforming question???

The point of using the primer pocket uniformer is to uniform the depth of the pocket. The primer pocket tool should be designed in a way that allows it to work with your primers so that the depth of a pressed in primer is .003 to .008 thousanths of and inch below the base of the case. It does not matter where your primers bottom out within the range stated above, it only matters that they bottom out to exactly the same depth. [img]images/icons/smile.gif[/img]
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: primer pocket uniforming question???
Thread Thread Starter Forum Replies Last Post
Primer Pocket? kc Reloading 8 09-19-2010 11:34 AM
help ID this primer pocket swager xtratoy Reloading 0 11-08-2009 01:38 PM
primer pocket stretch coupalr Reloading 2 04-16-2006 10:40 AM
Primer Pocket Uniforming......twice Ramses II Reloading 3 05-23-2005 07:53 AM
Primer Pocket Uniforming Zane in Oregon Reloading 4 01-28-2005 09:10 AM

Current Poll
In the last 12 months, what was your longest rifle kill on big game?
0 to 200 yards - 25.86%
1,474 Vote
201 to 400 yards - 32.10%
1,830 Vote
401 to 600 yards - 23.12%
1,318 Vote
601 to 800 yards - 10.00%
570 Votes
801 to 1,000 yards - 3.95%
225 Votes
Over 1,000 yards - 4.98%
284 Votes
Total Votes: 5,701
You may not vote on this poll.

All times are GMT -5. The time now is 02:34 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC