Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels and Ballistics


Reply

Polygonal Question, and a lot of them

 
LinkBack Thread Tools Display Modes
  #1  
Old 06-07-2003, 04:57 PM
Bronze Member
 
Join Date: May 2003
Location: Alabama
Posts: 99
Polygonal Question, and a lot of them

Would you all explain polygonal rifling to me? What does a cross section of the bore look like? Are all the sharp angles eliminated at the edges of the lands and the juntion of the lands and grooves? Or is it a geometry shape like a pentagon, hexagon, or....?

How does a polygonal barrel compare to a Mike Rock 5R in performance? When it is time for me to rebarrel should I go with a Pac Nor instead of another Mike Rock? Do polygonal barrels generally do well with Barnes X bullets?

Please have patience with this FNG. Thanks for any help and sorry to take up so much of everyone's time.
__________________
Rapid fire is the crutch of an incompetent marksman. ONE SHOT, ONE KILL
Reply With Quote
  #2  
Old 06-08-2003, 07:24 AM
Silver Member
 
Join Date: Mar 2003
Location: Schofield, WI.
Posts: 323
Re: Polygonal Question, and a lot of them

Ruff, I know one thing, well maybe a couple, these barrels foul less and you don't need to seat the bullets so close to the lands, and they last longer, read a test on the H&K PSG-1, they had like 10,000 rounds through the barrel and it was still going strong, I couldn't believe the accuracy they were getting from this AUTO with the polygonel barrel, and if it's good enough for Dave Tubb, it's good enough for me, my next barrels' going to be a Schnieder poly. [img]images/icons/wink.gif[/img] Jay.
Reply With Quote
  #3  
Old 06-08-2003, 04:47 PM
Platinum Member
 
Join Date: May 2001
Posts: 2,369
Re: Polygonal Question, and a lot of them

RuffHewn

There are a few folks around the net that know a good deal about polygonal rifling, sometimes they show up. One such individual is associated with some two name barrel maker from Europe....it's coming to me......damn, maybe in a bit! Jim Ryan a Tactical Ordinance in Meridian Idaho (208) 288-1450, make sure you ask him about Male vs Female polygonal--- I can't remember which is which.... I know! sticks out OR sticks in but there's more to it. Warren Jensen is up on this type of rifling too I believe, he recognized my type (male or female whichever it was) from an fired projectile I sent him.

(Still can't recall that barrel makers name.....my mind's a little cluttered but it's in here somewhere.....no, theme song from Flipper Flipper..Flipper.. faster than lightning.... Nope, Rebecca Issacson... 2nd grade at Black School, red hair, body of a 3rd grader.....Cooper Peedy, Opal mine in Australia..... where do these things come from??? Not Black Starr, Not Roger Whittaker, not Samual Clemens, not John Merrick.... got it Lothar Walther offers polygonal barrels too... sharp as a tack so there!

Jim Ryan would be a good call if you're going with a Pac-Nor.

[ 06-08-2003: Message edited by: Dave King ]
Reply With Quote
  #4  
Old 06-18-2003, 09:52 AM
Bronze Member
 
Join Date: Aug 2001
Location: Del Rio TX
Posts: 38
Re: Polygonal Question, and a lot of them

Lothar Walther does make a fine Poly barrel.
They do tell me that the barrels are really designed for accurate high rate of fire firearms like ARs and such.
They also say they will last a very, very long time, even longer than one of the standard LW-50 barrels which last a very long time, however, accuracy with the poly barrels can be expected to be slightly less than with their conventio0nal rifled barrels.

I have not used one yet, but will in the near future when refitting a LE agencies M-4 with one.
Slightly less could mean that instead of one little hole for groups, it may just be one bigger hole, but I cannot say for sure yet.

I will give a report in about 3 months on the M-4's accuracy when we do the job.

Celt
__________________
H.D. Rifles
Reply With Quote
  #5  
Old 07-17-2003, 10:37 PM
Silver Member
 
Join Date: Mar 2002
Location: Central Minnesota
Posts: 429
Re: Polygonal Question, and a lot of them

Dave, that name you are thinking of woundn't be Pac Nor would it? My .300 Wby should be finished with a 30" poly barrel in it in a few weeks here.
__________________
a whisper from this little friend of mine goes a lot way.
Reply With Quote
  #6  
Old 07-18-2003, 05:23 AM
Platinum Member
 
Join Date: May 2001
Posts: 2,369
Re: Polygonal Question, and a lot of them

NightHawk

I believe I mentioned Pac Nor...not directly though so thanks...

I have and have had many Pac Nor polygonal barrels...they work very well.
Reply With Quote
  #7  
Old 07-18-2003, 12:11 PM
Silver Member
 
Join Date: Mar 2002
Location: Central Minnesota
Posts: 429
Re: Polygonal Question, and a lot of them

Dave I think I remember you mentioning Pac Nor, but it was late so I'm not sure. They said they don't do Titanium Nitride finish, do you know who would? It isn't important, but I would like to protect my barrel without the shine of bare stainless steel. What are you doing up so early anyway? [img]images/icons/grin.gif[/img]
__________________
a whisper from this little friend of mine goes a lot way.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Polygonal Question, and a lot of them
Thread Thread Starter Forum Replies Last Post
Polygonal rifleing- HELP 6.5x284tony Gunsmithing 0 10-10-2010 09:11 AM
Polygonal rifleing ROBSTER Rifles, Bullets, Barrels and Ballistics 4 01-06-2010 09:25 AM
Pac-Nor Polygonal Barrels StevenD Rifles, Bullets, Barrels and Ballistics 3 01-03-2007 07:41 PM
Pac-Nor POLYGONAL rifling anyone????? mindcrime Rifles, Bullets, Barrels and Ballistics 10 01-06-2006 04:13 PM
Polygonal rifling? snicl1 Rifles, Bullets, Barrels and Ballistics 4 03-24-2004 04:25 PM

Current Poll
Do You Think Slingshots Should Be Legalized For Hunting Brown Bear?
Yes - 47.51%
840 Votes
No - 52.49%
928 Votes
Total Votes: 1,768
You may not vote on this poll.

All times are GMT -5. The time now is 07:20 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC