Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Pillar Bedding

LinkBack Thread Tools Display Modes
Unread 04-11-2005, 05:07 AM
Junior Member
Join Date: Feb 2004
Location: Georgia
Posts: 23
Pillar Bedding

I just traded for a Win 70 XTR Sporter. I want to pillar bed the stock but have never done one before. Looking at the back screw hole it looks like there is not enough wood at the top of the stock . Any suggestions/comments would be appreciated.
Reply With Quote

Unread 04-11-2005, 10:22 AM
Official LRH Sponsor
Join Date: Jun 2004
Location: Fort Shaw, Montana
Posts: 6,841
Re: Pillar Bedding


There are times that the pillar needs to be turned downin diameter at the top to remain hidden under the receiver tang. This may be the case with your rifle.

Good Shooting!!

Kirby Allen(50)
Kirby Allen(50)

Allen Precision Shooting
Home of the Allen Magnum, Allen Xpress and Allen Tactical Wildcats and the Painkiller Muzzle brakes.

Farther, Faster and Flatter then ever before.

Web Page:
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Pillar Bedding
Thread Thread Starter Forum Replies Last Post
Glass bedding vs. Pillar Bedding summitsitter The Basics, Starting Out 7 06-20-2013 01:09 AM
Action bedding & Pillar bedding mkbaquet The Basics, Starting Out 4 01-20-2011 09:45 PM
tuning up my rem 700 bdl. pillar bedding ?? camoman80 Gunsmithing 3 05-27-2010 09:44 AM
DIY pillar bedding? mtelkhntr78 Gunsmithing 29 03-14-2009 09:55 AM
Pillar Bedding Inukshuk Rifles, Bullets, Barrels & Ballistics 2 03-28-2005 06:55 PM

All times are GMT -5. The time now is 03:08 PM.

Powered by vBulletin ©2000 - 2015, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2015 Long Range Hunting, LLC