Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Opinions on Rebarreling a Rem. 25/06?

LinkBack Thread Tools Display Modes
Unread 10-28-2009, 02:18 PM
Silver Member
Join Date: Jun 2009
Posts: 125
Opinions on Rebarreling a Rem. 25/06?

I have a Remington 700 in 25/06 we have had for years. It probably has had thousands of rounds ran threw it. Still shoots well but not like it use to.

Gotta a few questions.

1st...What calibers, besides a 25/06 can you change to? And which would you guys and galls reccommend me to get? Prob be a deer gun. Ranging from 0 to 600 yards. But might be a little small for deer at that ranges so might be a extreme long range shooter for coyotes instead.

2nd...What does it usually cost to have it rebarreled? And what all would you have done to the action?

3rd... Who would you recommend?

And 4th...What brand of barrel would you go with?
Reply With Quote

Unread 10-28-2009, 05:50 PM
Silver Member
Join Date: Oct 2007
Posts: 330
Re: Opinions on Rebarreling a Rem. 25/06?

Assuming you reload for this rifle, and based upon your alias (270WSM) I would most likely rebarrel to the same cartridge. All of the assumes you are happy with the 25-06 as a caliber/cartridge, stock, and barrel countour as is.

If you are up for making changes, i.e. a new barrel, do you want to keep it in the same stock? If so you may want to stay with the same barrel contour (& rifle stock barrel channel).

Based upon the limited info you have given us, it is very hard to beat the 25-06 for what you have said so far. The only thing you might consider doing is going to an Ackley Improved version with 40 deg shoulders.

For long range varmint hunting, and deer Hunting too, the 25-06 is a fine rifle.

But then for deer you are stepping into the 270 WSM's relm with authority (as you already know).

Snohomish Co. Washington
NRA Life Member
Reply With Quote
Unread 10-28-2009, 09:23 PM
Platinum Member
Join Date: May 2008
Location: South of Canada and North of Wyoming
Posts: 6,068
Re: Opinions on Rebarreling a Rem. 25/06?

I agree with Chopaka... I have a 25-06 Sendero and it's bore has seen bettere days. It still shoots great, but anticipate a rebarrel fairly soon. I'll go with another Sendero contour in the same 25-06 chamber, with a custom match grade barrel. Haven't decided which one yet, but it's hard to go wrong with any of the dozen or so top barrel makers.

The AI is an interesting chamber, but I'll stick with the basic 25-06 as I am getting AI velocites and better with RL17, have the dies etc.

110 AB's MV 3500
115 Ballistic Silvertips MV 3405

That's good enough for me.

Reply With Quote
Unread 10-28-2009, 09:55 PM
B23 B23 is offline
Platinum Member
Join Date: Oct 2008
Location: Spokane, Wa.
Posts: 1,079
Re: Opinions on Rebarreling a Rem. 25/06?

I would probably take a good look at a 280 Rem. Ackley Improved. You can get brass and or loaded ammo from Nosler and an endless variety of bullets.

280 Rem. AI would make and excellent deer gun out to 600yds.
Reply With Quote
Unread 10-28-2009, 10:30 PM
Official LRH Sponsor
Join Date: Jun 2004
Location: Fort Shaw, Montana
Posts: 6,848
Re: Opinions on Rebarreling a Rem. 25/06?

1. You could convert your Rem 700 to anything from the '06 case size up to and including any of the RUM chamberings or wildcats. The list is nearly endless what you COULD convert your 25-06 Remington into. Only limitations are your goals and how much you want to pay to convert the receiver which even into a RUM class chambering is not all that difficult.

For the needs you discribe, there really is no need to convert to a larger chambering then the '06 case size. To be honest, for what you want to do, out to 600 yard deer hunting, I would look real hard at the 6.5-06 AI. A 140-142 gr match bullet such as the Berger VLD or A-Max or SMK will be extremely effective on even heavy deer out to 600 yards and perform very well in the wind and terminally as well. A 6.5-06 AI will pretty much do anything that a 280 AI will do but do so with a bit more velocity(less drop), matching wind drift and noticably less recoil then the 280. Either will certainly work but the 6.5 will just be a bit more warm and fuzzy to shoot.

2. Simple rebarreling will range from $300 to $600 depending on barrel cost and what the smith charges for barrel fitting and chambering. Personally, I would charge around the top end for a 27" stainless steel Lilja, installed, finished and bead blast matte finished. Most on this board will be similiar to this with equal priced barrels.

Thats for a simple barrel installation. It can get much more extensive if you want full receiver accurizing and such. In my opinion, its a risk to install a match grade barrel on a receiver that has not been accurized. Much better investment to know that the receiver is true and square when the barrel is installed. Not saying the rifle would not shoot, just the odds are much better if the rifle is true from the rear receiver screw to the muzzle crown.

3. I would support the smiths here on Longrangehunting. Not saying myself specifically but I know most of the smiths that frequent LRH and all are top knotch guys and smiths. You will not go wrong with any of us. I only say to use a smith here on LRH because you seemed to feel the opinions here were worth asking your questions to. There are hundreds of great smiths in our country so the smiths here are certainly not the end all but they are great smiths and put alot of time and offer alot of free experience here on LRH so we appreciate the members support.

4. I use Lilja, Hart, Broughton, Rock, Krieger, Brux and Bartlien mostly. Of these, by far I use Lilja the most but all of these will get you a 1/2 moa rifle if installed properly. From what I have seen, on average, you can really take your pick. They are all very good.

Some of the lower priced barrels such as Pac-Nor, Shilen and Douglas will also make good shooters but they are not in the class of the other barrels mentioned previously.

Hope this helps some. Good luck with your project.
Kirby Allen(50)

Allen Precision Shooting
Home of the Allen Magnum, Allen Xpress and Allen Tactical Wildcats and the Painkiller Muzzle brakes.

Farther, Faster and Flatter then ever before.

Web Page: www.apsrifles.com

Reply With Quote
Unread 10-29-2009, 01:14 AM
Platinum Member
Join Date: Feb 2006
Location: az
Posts: 3,226
Re: Opinions on Rebarreling a Rem. 25/06?

adjust the trigger . have the action trued when re-bRRELING. get a krieger or one of the barrels anmed in the first list. a 6.5-284 would be a good choice.
Reply With Quote
Unread 10-29-2009, 07:12 AM
Platinum Member
Join Date: Dec 2001
Location: Potters Hill, NC
Posts: 1,726
Re: Opinions on Rebarreling a Rem. 25/06?

I have a .25-06 Sendero that my son is using and when the barrel goes south on it I plan to have the receiver trued and a 28" Lilja (fluted, Sendero contour) installed in 6.5-06AI by Kirby. JohnnyK.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Opinions on Rebarreling a Rem. 25/06?
Thread Thread Starter Forum Replies Last Post
Rebarreling 25-06...8mm Rem. Mag Idaho Shooter Gunsmithing 5 09-27-2010 09:06 PM
Rebarreling to 280 AI BH Hunter Long Range Hunting & Shooting 3 10-31-2009 09:09 PM
rebarreling .308 foreign Gunsmithing 6 10-02-2008 03:34 PM
Rebarreling Hagar Rifles, Bullets, Barrels & Ballistics 1 05-28-2006 04:07 PM
Rebarreling .22/250 for 6.5-284 tunofun Long Range Hunting & Shooting 2 08-19-2004 03:40 AM

All times are GMT -5. The time now is 03:52 PM.

All content ©2010-2015 Long Range Hunting, LLC