close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

Norma or Winchester (6.5x284) reamer for chambering....

LinkBack Thread Tools Display Modes
  #1  
Unread 12-26-2011, 01:11 PM
Platinum Member
 
Join Date: Jan 2003
Location: The rifle range, or archery range or behind the computer in Alaska
Posts: 3,807
Norma or Winchester (6.5x284) reamer for chambering....

So now I have a decision to make. Do I go with a 6.5x284 Norma or Win chamber? Going to try and run the 140-142's (AMAX, SMK, VLD etc...) and I will be limited to 2.990" OACL. In your experience, which would be the better chambering?

Regards!

M
__________________
__________________
Long range shooting is a process that ends with a result. Once you start to focus on the result (how bad your last shot was, how big the group is going to be, what your buck will score, what your match score is, what place you are in...) then you loose the capacity to focus on the process.
Reply With Quote
  • Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Norma or Winchester (6.5x284) reamer for chambering....
    Thread Thread Starter Forum Replies Last Post
    6.5x284 norma Gator26 Rifles, Bullets, Barrels & Ballistics 10 08-19-2013 06:12 PM
    6.5x284 Norma from a rem 721 Driller54 Rifles, Bullets, Barrels & Ballistics 2 10-27-2011 07:09 PM
    WTB.. 6.5x284 norma(winchester)dies... kaseyfied Reloading Equipment and Components 0 03-12-2011 02:35 PM
    6.5x284 Norma vs Win ? MN Hunter General Discussion 6 09-20-2009 07:37 PM
    Re-chambering .358 Norma Mag to .358 STA Death Ray 7 General Discussion 5 06-28-2006 11:14 AM


    All times are GMT -5. The time now is 11:10 AM.


    Powered by vBulletin ©2000 - 2016, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC