Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

No load data for 6.8 SPC II

 
LinkBack Thread Tools Display Modes
  #1  
Old 09-17-2013, 01:48 PM
Junior Member
 
Join Date: Sep 2013
Location: Simpsonville, SC
Posts: 19
No load data for 6.8 SPC II

Does anyone have any good reloading data for a 6.8 SPC II? The reloading manuals only cover 6.8 SPC spec, but SPC II can tolerate "hotter" loads. Unfortunately, Wilson Combat will not public their load data for the SPC II ammunition they make. I want to use Alliant Reloader 10x (which is powder they use), but I want to know what SPC II loads are built for not SPC. I am thinking and can go 1 grain above max. as listed in Nosler relaoding manual (for 11 gr. AccuBond).

Thanks in advance for sharing!
Reply With Quote
  #2  
Old 09-22-2013, 08:50 PM
Junior Member
 
Join Date: Nov 2002
Location: south east Sask.
Posts: 11
Re: No load data for 6.8 SPC II

Go to a website called 68forums as there is lots of data there.
Reply With Quote
  #3  
Old 09-22-2013, 10:21 PM
Silver Member
 
Join Date: Oct 2009
Posts: 229
Re: No load data for 6.8 SPC II

I use 10x in mine. 29.5 gr 10x under 95gr Barnes TTSX in an SSA case with a CCI 450 primer. OAL is 2.295".
Reply With Quote
  #4  
Old 09-28-2013, 06:41 PM
Junior Member
 
Join Date: Aug 2013
Posts: 1
Re: No load data for 6.8 SPC II

Check out AmmoGuide Interactive. They shows 13loads for 6.8SPC II.
Reply With Quote
  #5  
Old 09-28-2013, 08:55 PM
Junior Member
 
Join Date: Sep 2013
Location: Simpsonville, SC
Posts: 19
Re: No load data for 6.8 SPC II

Thanks for sharing this site.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes



All times are GMT -5. The time now is 02:37 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC