Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


New Remington bedding question

LinkBack Thread Tools Display Modes
Unread 07-06-2004, 02:13 PM
Silver Member
Join Date: Jun 2004
Posts: 198
Re: New Remington bedding question

new member,currently asking advice and learning from the experts here,but i have removed the pinch on 5 700 rem's so far,all with much better results!i cant figure why they still do it? [img]images/icons/confused.gif[/img] tru oil seals the wound well.while you're at it,get the trigger tuned to your liking.my 30-06 grouped 6" difference from summer to winter up and down @ 100yds,they must want you to burn more ammo,which is good!
Reply With Quote

Unread 07-06-2004, 10:31 PM
Bronze Member
Join Date: May 2002
Location: Washington
Posts: 68
Re: New Remington bedding question

If you decide that you may not want the laminate stock give me shout.
I personally would take a Laminate stock over a syn. for hunting. I like the warmth of wood much better and when bedded properly they will hold their "zero" rather well.
(need help on the bedding or floating - drop a e-mail. Can send pictures).
Coyote Hunter
West Coast of Washington
Reply With Quote
Unread 07-07-2004, 01:25 PM
Bronze Member
Join Date: Apr 2004
Location: Michigan-USA
Posts: 75
Re: New Remington bedding question

I have the VLS in .223 and absolutely love it. To obtain best accuracy, I did free float the barrel on mine and bed the action using Accra-glass. Shoots wonderfully! I also prefer the laminated over the sythetics. I know they perform well, I just hate the feel of them.
....when they pry my cold dead fingers from around it
Reply With Quote
Unread 07-07-2004, 04:07 PM
Posts: n/a
Re: New Remington bedding question


I greatly appreciate the help. I think I will sling some rounds down range then if it performs like poop...I'll have it bedded. I almost think I can tackle the job myself [img]images/icons/smile.gif[/img]

Reply With Quote


Thread Tools
Display Modes

Similar Threads for: New Remington bedding question
Thread Thread Starter Forum Replies Last Post
bedding question 300remum Gunsmithing 5 09-03-2011 10:04 PM
Remington 600 action bedding question wm5l Gunsmithing 1 10-11-2010 12:05 AM
Bedding question shadowdrak Gunsmithing 9 08-12-2008 07:22 AM
Bedding question IceSniper General Discussion 0 03-07-2006 10:17 PM
bedding question/Primer Question larryaguilar Rifles, Bullets, Barrels & Ballistics 7 03-01-2003 12:10 AM

All times are GMT -5. The time now is 05:32 PM.

All content ©2010-2015 Long Range Hunting, LLC