Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

new poster : 300wmag with 28" barrel

 
LinkBack Thread Tools Display Modes
  #1  
Old 10-13-2009, 10:19 PM
Junior Member
 
Join Date: Oct 2009
Posts: 4
new poster : 300wmag with 28" barrel

First time user to Long Range Hunting Forum.. Can someone mentor me in long range loads for 300win mag with Thompson Center 28" fluted barrel. I live and hunt elk in CO and I reload. Different powders for longer barrel? Suggestions on bullet size and powder combos. FPS? I've had luck with 165 balistic tips at about 3100.. Any and all suggestions would help. Thompson has only had trigger lightened. What would be next?
Reply With Quote
  #2  
Old 10-14-2009, 02:27 AM
Gold Member
 
Join Date: Feb 2008
Posts: 536
Re: new poster : 300wmag with 28" barrel

Welcome to the forum!

I can only tell you what works for me.
I have had the best results in my 28" barrel with RE22 and RE25, the difference in velocity between the 2 is substantial, but the accuracy has been almost identical.

I haven't used any bullets lighter than 180gr's, but either powder should work for 165's.

I run Nosler brass, Fed 215 primers and 180gr Accubonds with 81gr's of RE25 for 3200fps+. I get .5MoA @ 600yrds consistently with this combination, or in other words 3" groups with 5 shots.
Same components as above, but with 75gr's of RE22 is also a very accurate load. Velocity runs around 3060fps.

Another very good long range load in my rifle is Nosler brass, Fed 215 primer and 200gr Accubonds with 78.5gr's of RE25 for just a tad under 3100fps. Accuracy is on par with the 180gr load. Same as above, but with 72gr's of RE22 is also another good performer. Velocity is 2980fps.
I also use the same components but with 78gr's of RE25 with the 208gr A-max, accuracy is also up there, but have never found it to be consistent over 600yrds in my rifle due to vertical stringing.

Last edited by MagnumManiac; 10-14-2009 at 02:33 AM. Reason: Forgot load data!
Reply With Quote
  #3  
Old 10-14-2009, 07:09 AM
Junior Member
 
Join Date: Oct 2009
Posts: 4
Re: new poster : 300wmag with 28" barrel

excellent! thank you for sharing all your field work with me. Should have found you about a year ago.....Now I want to reload instead of go to work....ha ha... ew
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: new poster : 300wmag with 28" barrel
Thread Thread Starter Forum Replies Last Post
"SOLD" Brux 6mm/.243 barrel, 1:8 Twist GWozniak Gun Parts - Stocks, Barrels, Actions, etc. 4 06-13-2011 04:21 PM
What bullet/powder recomendation? 308win, 1in9" twist, 22" barrel Ultra25-06 Long Range Hunting & Shooting 4 11-09-2010 02:51 PM
wtt 20" heavy barrel upper for 20" or 24" bull barrel mike1113 Guns For Sale 1 03-19-2010 11:08 AM
22" vs. 24" vs. 27" barrel; velocity differnce on a .260? scottl0000@hotmail.com Rifles, Bullets, Barrels & Ballistics 4 02-17-2010 08:09 AM
SENDERO 7 Mag. " unfired " FLUTED TAKE-OFF BARREL jbo Gun Parts - Stocks, Barrels, Actions, etc. 7 10-05-2009 04:41 PM


All times are GMT -5. The time now is 06:46 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC