close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

New CNC'd machined Remington 700 Clones by Mike Rock

LinkBack Thread Tools Display Modes
  #8  
Unread 11-08-2003, 11:28 AM
Bronze Member
 
Join Date: Sep 2001
Location: San Jose, CA
Posts: 66
Re: New CNC\'d machined Remington 700 Clones by Mike Rock

Jeff,

Consider using the Winchester action for your 300 WSM project. The problem with Remington is that the magazine is too short to take advantage of the heavier bullets because they have to seated too deep. The Winchester magazine is a little bit longer and allows the 190s and up to be seated out far enough out to get use of all of the case volume.

[ 11-08-2003: Message edited by: Blaine Fields ]
Reply With Quote
  •   #9  
    Unread 11-08-2003, 11:34 AM
    Gold Member
     
    Join Date: May 2001
    Location: Urich, MO
    Posts: 838
    Re: New CNC\'d machined Remington 700 Clones by Mike Rock

    Jeffand Blaine-
    Stick with thr Remmy- We (George and I) buld 'em all the time on a Remmy and install the Wyatts extended mag box so there is no problem using the 190 MK.
    __________________
    Chris Matthews
    www.longshotriflesllc.com
    Reply With Quote

      #10  
    Unread 11-11-2003, 04:37 PM
    Bronze Member
     
    Join Date: Sep 2003
    Location: California
    Posts: 68
    Re: New CNC\'d machined Remington 700 Clones by Mike Rock

    I have known about the recievers for about 2 years now and reserved the serial numbers 002 and 003.... I am Still waiting.

    But I think it will be worth the wait. It the recievers turn out half as good as the barrels then I will be very happy.

    If it doesn't work out, owe well, nothing lost on my part.

    bryan

    [ 11-11-2003: Message edited by: xring01 ]
    Reply With Quote
      #11  
    Unread 11-12-2003, 06:57 AM
    *WyoWhisper*
     
    Posts: n/a
    Re: New CNC\'d machined Remington 700 Clones by Mike Rock

    Jeff and Blaine,

    I say what Chris said......

    He put a Wyatts in my first 300WSM built on a Remmy.. and it works GREAT!!!
    He's doing the same thing on the second one he's building for me! I plan on shooting the 190's and 200's from it!

    Chris and George have built bunches doing this.. George ( If I remember correctly ) did the same thing for his own rifle....
    Reply With Quote
      #12  
    Unread 11-12-2003, 10:25 AM
    Platinum Member
     
    Join Date: Jul 2003
    Location: Central PA
    Posts: 1,307
    Re: New CNC\'d machined Remington 700 Clones by Mike Rock

    will the wyatts "device" let a 6.5-284 into a rem SA??--what is the max OAL with the wyatt box??

    JB
    __________________
    Check it Out!!--> Shoot the Smack The Smiley Match...and help AmericanSnipers.org
    Reply With Quote
      #13  
    Unread 11-12-2003, 06:20 PM
    Gold Member
     
    Join Date: May 2001
    Location: Urich, MO
    Posts: 838
    Re: New CNC\'d machined Remington 700 Clones by Mike Rock

    JB,
    Depends on where you throat the chamber to get into a SA with the 142's. Can easily do it using the 140's. The Wyatt's extended box gives you about 0.100" more room than a factory box.
    __________________
    Chris Matthews
    www.longshotriflesllc.com
    Reply With Quote
      #14  
    Unread 11-14-2003, 03:21 AM
    Bronze Member
     
    Join Date: Sep 2002
    Location: North West Ontario, Canada
    Posts: 39
    Re: New CNC\'d machined Remington 700 Clones by Mike Rock

    Where would I find one of these Wyatt mag's? It would be perfect for my Tomahawk project.
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: New CNC'd machined Remington 700 Clones by Mike Rock
    Thread Thread Starter Forum Replies Last Post
    Mike Rock 5R M24 Barrel blank BountyHunter Guns For Sale 7 10-24-2009 02:46 PM
    Mike Rock barrels??? PrimeTime Rifles, Bullets, Barrels & Ballistics 9 01-13-2008 01:08 AM
    Mike Rock Ballels mikekelly The Basics, Starting Out 9 10-03-2005 06:22 PM
    Mike Rock 5R Barrel Sold Carbonman Guns For Sale 3 09-20-2004 05:26 PM
    ? about Mike Rock 5R barrels GEG Rifles, Bullets, Barrels & Ballistics 12 08-10-2003 11:27 PM


    All times are GMT -5. The time now is 08:55 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC