close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

Neil Jones..Custom Die Maker

LinkBack Thread Tools Display Modes
  #1  
Unread 03-18-2003, 01:50 PM
Platinum Member
 
Join Date: Jun 2007
Location: Wilmington NC
Posts: 4,751
Re: Neil Jones..Custom Die Maker

Randy

Just got my new dies from Neil last week, so he is still alive. Try email njones@mdvl.net or contact from his web at www.neiljones.com. fax is (814) 763-4228

Other guy might be Jim Carstenson (JLC Precison ad in Precision shooting). he can make FL size die off your fired brass or from your chamber reamer. Uses a body insert squeezed down in the die. He also converts any factory die to bushings for $35. His dies are not micrometer adjustable I do not think. Never had him make one, just convert to bushing for me.

Keep after Neil Jones for best dies in my opinion.

BH
Reply With Quote
  •   #2  
    Unread 03-18-2003, 02:05 PM
    Silver Member
     
    Join Date: Jan 2002
    Location: Richmond Va
    Posts: 267
    Re: Neil Jones..Custom Die Maker

    BH,

    Someone on VarmitHunters forum said he will be back April!!! I'm screwed because I need it now and he will have a backlog when he returns!

    Thanx for the reply
    __________________
    Still playing King of the Hill
    Beware the high ground
    -------------------------------
    [Reaching for wallet] You wouldn't happen to be a betting man would you?
    Impossible means not done YET!
    Reply With Quote

      #3  
    Unread 03-18-2003, 08:22 PM
    Platinum Member
     
    Join Date: Jun 2001
    Location: Palmer, Alaska
    Posts: 2,539
    Re: Neil Jones..Custom Die Maker

    Randy,

    I spoke with Neil on the phone about three weeks ago now, he said he'd be back on the 1st of April and have everything all caught up before he left on vacation March 1st. He said he'd get my dies right out the door after he got back if I called him on April 1st. That's still two weeks off, but he said he'd be all caught up. He said he couldn't get mine done before he left because he needed to get everything out the door before leaving. Good luck. [img]images/icons/smile.gif[/img]
    __________________
    Brent Moffitt
    Reply With Quote
      #4  
    Unread 03-19-2003, 12:45 AM
    Silver Member
     
    Join Date: Jan 2002
    Location: Richmond Va
    Posts: 267
    Neil Jones..Custom Die Maker

    Have tried to get him for weeks. Out of business or what? Are there any other custom die manufacturers?


    Thanx
    __________________
    Still playing King of the Hill
    Beware the high ground
    -------------------------------
    [Reaching for wallet] You wouldn't happen to be a betting man would you?
    Impossible means not done YET!
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Neil Jones..Custom Die Maker
    Thread Thread Starter Forum Replies Last Post
    Neil Jones neck/shoulder bushing die query Reloading 6 04-15-2015 06:42 AM
    Choosing a custom Rifle Maker Firecat Long Range Hunting & Shooting 33 03-14-2011 04:13 AM
    Neil Jones Custom Dies ? SHRTSHTR Reloading 23 09-10-2010 07:59 AM
    Custom bullet maker in poor health 1CouesHunter Rifles, Bullets, Barrels & Ballistics 0 09-24-2009 12:58 AM
    looking for a custom barrel maker MU Ag Rho Rifles, Bullets, Barrels & Ballistics 2 10-06-2006 10:06 AM


    All times are GMT -5. The time now is 05:28 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC