Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

Need help on re barrel of Rem 700

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-26-2009, 05:03 PM
Silver Member
 
Join Date: Feb 2008
Location: Texas
Posts: 144
Need help on re barrel of Rem 700

We picked up a used Rem 700 BDL some time back with the intent to re barrel it some time in the future. Well the other day we decided we would like to have a .280 Rem. We have looked at several smiths in our area and found that there prices seem to very quite a bit. Could someone explain what all work is involved in blue printing an action because we would like to become more familar with that.
The rifle will be used for whitetail and mule deer hunting, One smith recommended going with a 24" #4 or #5 contour barrel and I beleive it was a Krieger or a Lilja. Also I know gunsmithing prices vary in different parts of the country but what would be a reasonable price for this type of work. Thanks in advance for any comments.
Reply With Quote
  #2  
Old 04-26-2009, 08:08 PM
Gold Member
 
Join Date: Dec 2002
Location: mathias wv
Posts: 985
Re: Need help on re barrel of Rem 700

last I checked around 250.00 to fit and chamber, around 150 to accurise a 700 action, I know they single point cut the threads, square the reciever face, square the bolt face, true the bearing surfaces of the lugs, really helps with accuracy when done right.
RR
__________________
Born to Hunt, Forced to Work!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Need help on re barrel of Rem 700
Thread Thread Starter Forum Replies Last Post
6mm re-barrel brand,length and barrel twist mcseal2 Rifles, Bullets, Barrels & Ballistics 12 11-07-2010 08:14 PM
wtb sendero barrel or like custom barrel in 7mm or 30 or 338 mag cal or hevier mayheel Gun Parts - Stocks, Barrels, Actions, etc. 3 02-23-2010 05:18 PM
barrel question. Could a ss barrel be too hard to ream???? oldfamily Rifles, Bullets, Barrels & Ballistics 24 05-29-2009 08:46 AM
which break, barrel length, barrel cotour, and twist? nathank Rifles, Bullets, Barrels & Ballistics 1 02-03-2009 08:31 PM
barrel block,barrel and action dwarren Guns For Sale 1 02-26-2007 07:33 PM


All times are GMT -5. The time now is 03:51 PM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC