Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


need help with load

LinkBack Thread Tools Display Modes
Unread 05-10-2009, 03:30 PM
Bronze Member
Join Date: Mar 2008
Location: South Dakota
Posts: 69
need help with load


I have just put together a 6mm 284 and need some reference data. If i could please have someone to run this through quickload that would be great.

105 jlk
fed 210
lapua brass
Shilen 1 in 8 twist
finished length 29"
I have looked all over and have not been able to find any data for this load. I would like to see 3350 with this bullet if at all possible.

Reply With Quote

Unread 05-10-2009, 04:05 PM
Platinum Member
Join Date: Oct 2005
Location: Michigan
Posts: 2,232
Re: need help with load

57.9gr gives you 3348fps, but is a somewhat compressed load at 107% fill ratio. the estimated pressure is 55,118psi (max is 59,465psi)

If some is good and more is better, then too much is just right.

My mind is a raging torrent, flooded with rivulets of thought, cascading into a waterfall of creative alternatives
Reply With Quote
Unread 05-11-2009, 01:43 PM
Bronze Member
Join Date: Mar 2008
Location: South Dakota
Posts: 69
Re: need help with load

Thanks AJ that will give me a place to start from.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: need help with load
Thread Thread Starter Forum Replies Last Post
Kirby Allen’s “no load development” load development method. WildcatB Reloading 70 09-24-2012 06:01 PM
260 Load Help.. Quick Load??? novaman64 Reloading 6 09-02-2012 11:48 AM
Load data .243 Ackley varmit load please ballie Reloading 5 02-22-2011 01:49 PM
338 RUM Load Capt Academy Reloading 0 10-04-2008 08:06 AM
load for 300 win mag popwarlick Reloading 1 03-23-2008 04:21 AM

All times are GMT -5. The time now is 03:12 AM.

All content ©2010-2015 Long Range Hunting, LLC