Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Need to hack 40XB-KS stock to fit *me*!! (long)

LinkBack Thread Tools Display Modes
Unread 09-26-2002, 06:58 PM
Platinum Member
Join Date: Jun 2007
Location: Wilmington NC
Posts: 4,766
Re: Need to hack 40XB-KS stock to fit *me*!! (long)

should be able to sell in on benchrest.com, xtremeaccuracy.com or 24 campfire. all have adds forums. should be able to get at leat $100. contact bruce baer in pa for stock. he makes custom laminated (25 patterns) and he can modify make longer etc any style. should be able to buy and inletted one for under $250

good luck
Reply With Quote

Unread 09-26-2002, 07:25 PM
Platinum Member
Join Date: May 2001
Location: Sask. Canada
Posts: 2,410
Re: Need to hack 40XB-KS stock to fit *me*!! (long)

I am certainly not a stockfixer but the more I see pros work on composite stocks the more some of their work reminds me of auto-body repairmen. They grind, file, fill, spray, build-up, take-down and generally do things that are not feasable with wooden stocks. Boo-boos are usually not a big deal as you can fill or whatever and re-paint. Saw some photos of some really beat-up composite stocks that were returned to like-new condition.

The A-2 or A-3 is the way to go since McMillan will give you whatever length of pull you need. Unfortunately there might be a fair difference between what you could get for a used 40x stock and a new A-series.

Sounds like there is nothing stopping you from making that 40x stock fit right. It is most likely a McMillan so you are working from a good base. Same goes for the trigger-guard exchange. Brownells no doubt sells any parts you need and would probably advise you as to how to make the swap.
Reply With Quote
Unread 09-26-2002, 11:24 PM
Gold Member
Join Date: Jan 2002
Location: Wenatchee, WA
Posts: 806
Need to hack 40XB-KS stock to fit *me*!! (long)

Well, looks like I'm going to end up keeping the 40XB-KS in .220 Swift for now. I had opted to try to sell it, as my first actual field outing w/ it (after 800-900rds of range time on benchrests and sandbags) revealed that the factory McMillan stock *really* does not fit me well, as I am 6'5" w/ long neck and arms. Needs to be close to two inches longer and maybe as much as an inch higher comb.

I've considered getting some kind of stock spacer system installed, such as the one McMillan sells, or even a complete adjustable buttplate (2-way, 3-way is overkill for me) like a McMillan or Graco.

Problem is it seems that once I crank out the stock 1.5-2", the Monte Carlo cheek piece is going to be too far forward, and still too low. I could put a slip-on pad to boost it, but it'd be all cock-eyed, part on the existing raised cheekpiece, part not. I've thought about trying something another local shooter showed me on one of his guns: he used some Pro-weld stuff (kind of like Pig-Putty, the stuff you knead the playdough looking stuff together, then stick it on the stock and form it to suit, later grinding it w/ a dremel or a file to finish, and paint to match. I've used this stuff for repairs on bushings, tanks, etc. on high-voltage electrical equipment, and even seen nuts made, drilled, and tapped from this stuff, so it *is* tough enough.

Is there any resale value for a 'stock' 40XB-KS stock, enough to be useful towards a new A3 or something similar? Am I going to be sacrificing anything if I butcher this stock a little?

Another thing... I'm looking at pillar/glass bedding the stock somewhere down the road also. How hard would it be for someone w/ some patience and some extra time on their hands to convert the stock and everyting to BDL w/ a custom trigger guard/magazine floorplate? The ADL magazine box on this 40XB has had me mad enough to just about try wrapping it around the side of the house a couple times. If I never touch another ADL, it'll be too soon!!!

Comments, suggestions, remarks?

Reply With Quote


Thread Tools
Display Modes

Similar Threads for: Need to hack 40XB-KS stock to fit *me*!! (long)
Thread Thread Starter Forum Replies Last Post
REM. 40XB in 300 Win. good or bad JWS The Basics, Starting Out 7 09-04-2011 09:12 PM
Rem.40xb 7mm mag. George LS Guns For Sale 0 01-31-2009 01:42 PM
remington 40xb Jimm Rifles, Bullets, Barrels & Ballistics 13 01-24-2005 06:32 PM
Rem 40XB 7Mm mag chetc Guns For Sale 0 03-05-2004 08:15 PM
F/S: Rem 40XB-KS .220 Swift milanuk Guns For Sale 0 05-27-2002 07:28 PM

All times are GMT -5. The time now is 12:11 AM.

All content ©2010-2015 Long Range Hunting, LLC