Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Reply

Neck sizing?

 
LinkBack Thread Tools Display Modes
  #1  
Old 04-02-2003, 06:33 PM
JBT JBT is offline
Junior Member
 
Join Date: Feb 2003
Posts: 24
Neck sizing?

Is an annealer necessary for sizing the neck down from a 416 to a 30 cal.?
Reply With Quote
  #2  
Old 04-02-2003, 06:54 PM
Silver Member
 
Join Date: Dec 2001
Location: Nanty-Glo, Pennsylvania
Posts: 127
Re: Neck sizing?

11971

It wouldn't hurt, especially if you take more than one step down and turn your necks, you are really work hardening your necks. If uniform neck tension and case life is important to you then it sure would help.

Dan
Reply With Quote
  #3  
Old 04-03-2003, 08:02 AM
Silver Member
 
Join Date: May 2001
Location: NC
Posts: 352
Re: Neck sizing?

11971,
Just do it after all the necking down is completed. If you do it before hand and get the neck/shoulder really soft, you will probably collaspe the shoulder when trying to neck it down and end up with a pile of junk brass.
Been there done that...... once!!! many years ago. Can send pictures if your interested in what the aftermath looks like.

Steve
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Neck sizing?
Thread Thread Starter Forum Replies Last Post
fL sizing vs neck sizing D Scott Reloading 4 07-20-2011 04:18 PM
.223 rem Neck I.D. after sizing ( Help ) Rev. Reloading 12 02-17-2011 04:11 PM
neck sizing or fll length sizing cornchuck Reloading 19 05-20-2010 08:58 AM
Full length sizing VS neck sizing sniperjwt Reloading 6 02-21-2010 08:07 AM
FL vs neck sizing Rifles, Bullets, Barrels & Ballistics 5 12-14-2005 11:41 PM


All times are GMT -5. The time now is 05:52 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC