Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


muzzle break question

LinkBack Thread Tools Display Modes
Unread 03-11-2009, 09:38 PM
Platinum Member
Join Date: Aug 2005
Location: Murray, Ky.
Posts: 1,411
muzzle break question

Ok guys i have a vais muzzle break that came off of my edge and i was wandering if i could use it on my 300 ultra mag it has the same diameter. The only difference is the inside diameter is bored for a 338 which i would assume is 20 or so thousanths bigger than that, will the inside diameter being that much bigger make a difference in any way that yall know of. Guys dont get me wrong if i had the extra cash this thing would go right back to Darrell but i got a brake that hasnt cost me anything and right now times are tough.

Thanks to all
Reply With Quote

Unread 03-11-2009, 09:52 PM
Platinum Member
Join Date: Feb 2004
Location: Pennsyltucky
Posts: 2,634
Re: muzzle break question

the size of the hole has a very big effect on the recoil reduction. .020 clearance seems to be about optimal.
Reply With Quote


Thread Tools
Display Modes

Similar Threads for: muzzle break question
Thread Thread Starter Forum Replies Last Post
Muzzle break question. pyroducksx3 Long Range Hunting & Shooting 5 11-08-2009 01:17 AM
Muzzle Break question Ultramag45 Rifles, Bullets, Barrels & Ballistics 6 06-03-2009 06:44 PM
muzzle break question oldfamily Rifles, Bullets, Barrels & Ballistics 2 08-28-2006 08:34 AM
J-P muzzle break question B Jordan Rifles, Bullets, Barrels & Ballistics 7 04-05-2006 06:46 AM
Muzzle break question? larryaguilar Rifles, Bullets, Barrels & Ballistics 15 05-06-2003 11:42 PM

All times are GMT -5. The time now is 10:51 PM.

All content ©2010-2015 Long Range Hunting, LLC