Originally Posted by WoodWraith
As a first time ballistic software user I'm in a litte over my head with this software. So I was hoping you guys could help me with the reticle hold area I have a N.F. with NPR1 at 15x the software gives it in 22X m.o.a. is there any way to change that or compensate for it? Thanks for any and all help.Clint
Don't worry about changing the 22x for 15x, just make sure you set your scope at the zoom setting where each line is calibrated to be = to 1 moa. More likely that'd be at 15x. Then, at that setting the hold over values would be right on the money!
The picture above shown center of reticle to be good for 100 yards, you could change things around to where the very top line would be for zero giving you more adjustment for longer ranges.
Here to very top line would be on for 100 yards, the center of the cross hair would be on for 565 yards and so on. The ones that are not marked would be extremely easy to find out their distance-values by just going to the proper screen.
Notice, on the top photo from zero (at 100 yards) you need 10 MOA downwards to put you right at 565 yards. On the second photo, if you go from the very top 10 MOA downwards you'll be right at the center of the reticle and that'd be exactly 565 yards.
Jesus Christ the same yesterday, and to day, and for ever.
Our Lord Jesus said that as it was in the days of Noah and
also as it was in the days of Lot so it shall be in the days...
It's happening again!!! God sent to us His prophet, and His Word
to this generation and we once more are rejecting it as was prophesied!!!
---> As promised, God Sent His Prophet to us!