Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics


Largest contour that can be fitted into Sendero Stock

LinkBack Thread Tools Display Modes
Unread 05-02-2006, 10:44 PM
Gold Member
Join Date: Jul 2005
Location: East TX
Posts: 773
Largest contour that can be fitted into Sendero Stock

What is the largest contour that can be pillar bedded into a RP factory Sendero stock? FWIW, the action is a Rem700SA repeater, but single shot conversion is fine.
Reply With Quote
  •   #2  
    Unread 05-03-2006, 07:45 AM
    Official LRH Sponsor
    Join Date: Jun 2004
    Location: Fort Shaw, Montana
    Posts: 6,847
    Re: Largest contour that can be fitted into Sendero Stock

    I have fitted up to a Lilja #8 and they fit very well. Issues can be milling into the aluminum skeleton fram on the forend. Not a problem if you have a mill, serious porblem if your doing this work by hand.

    I have heard of guys drilling out these stocks and pillar bedding them but have never seen an advantage doing this over a skim bedding job.

    That is for a composite stock with the aluminum internal frame.

    If your talking about one of the laminated wood stocks, pillar bedding is the best way and very easy to do.

    Good Shooting!!

    Kirby Allen(50)
    Kirby Allen(50)

    Allen Precision Shooting
    Home of the Allen Magnum, Allen Xpress and Allen Tactical Wildcats and the Painkiller Muzzle brakes.

    Farther, Faster and Flatter then ever before.

    Web Page:
    Reply With Quote



    Thread Tools
    Display Modes

    Similar Threads for: Largest contour that can be fitted into Sendero Stock
    Thread Thread Starter Forum Replies Last Post
    #3 contour for a rem700 BDL stock? loaders_loft Gunsmithing 4 03-13-2010 09:40 PM
    Sendero contour for an Edge??? midgetorama32 Rifles, Bullets, Barrels & Ballistics 4 08-08-2009 12:20 AM
    338 Edge Sendero Contour ? Would You Change Contours? Gettn2 Rifles, Bullets, Barrels & Ballistics 5 05-14-2009 08:23 PM
    WTB,WTT - Accumark Stock #3 Contour huntfish Gun Parts - Stocks, Barrels, Actions, etc. 0 11-03-2008 09:04 PM
    Groups with new stock fitted. northernchris Long Range Hunting & Shooting 3 02-16-2007 08:11 PM

    All times are GMT -5. The time now is 07:18 PM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC