close
Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Rifles, Reloading, Optics, Equipment > Rifles, Bullets, Barrels & Ballistics

Rifles, Bullets, Barrels & Ballistics Applied Ballistics

Reply

Lapua Brass

LinkBack Thread Tools Display Modes
  #1  
Unread 12-03-2002, 12:26 AM
Platinum Member
 
Join Date: Jun 2001
Location: Palmer, Alaska
Posts: 2,539
Lapua Brass

I just bought some of this for the 308's and 243, question is they look like they don't need flashhole deburring. Do they need to be? I have a Sinclair Deluxe deburring tool that radiuses the hole and controls depth at the same time. Will it help if no burrs are even found in them to begin with?

Primer pocket uniforming, is it needed with these either? Pockets look beautifull as is, but haven't run the uniformer in them either.
__________________
Brent Moffitt
Reply With Quote
  •   #2  
    Unread 12-03-2002, 12:59 AM
     
    Posts: n/a
    Re: Lapua Brass



    [ 07-12-2003: Message edited by: S1 ]
    Reply With Quote

      #3  
    Unread 12-03-2002, 03:14 AM
    Platinum Member
     
    Join Date: Jun 2001
    Location: Palmer, Alaska
    Posts: 2,539
    Re: Lapua Brass

    Can you buy this .003" oversize reamer somewhere? Thanks alot.
    __________________
    Brent Moffitt
    Reply With Quote
      #4  
    Unread 12-03-2002, 07:12 AM
    Silver Member
     
    Join Date: Oct 2001
    Location: Altus, OK
    Posts: 180
    Re: Lapua Brass

    I debur the flash holes on all my Lapua brass from 308 - 338 Lapua. You WILL find burrs, contrary to popular belief, Lapua brass is punched just like remington, winchester etc. The only brass I have found that does not need deburring is Norma.

    I use a K&M Flash Hole deburring tool and it works exceptionally well.

    Jim
    __________________
    Learn from others mistakes, you won't live long enough to make them all yourself
    Reply With Quote
      #5  
    Unread 12-03-2002, 11:49 AM
     
    Posts: n/a
    Re: Lapua Brass



    [ 07-12-2003: Message edited by: S1 ]
    Reply With Quote
      #6  
    Unread 12-04-2002, 12:08 AM
    Platinum Member
     
    Join Date: Jun 2001
    Location: Palmer, Alaska
    Posts: 2,539
    Re: Lapua Brass

    Never heard of Hoehn, do you have a contact?
    __________________
    Brent Moffitt
    Reply With Quote
      #7  
    Unread 12-04-2002, 02:02 AM
     
    Posts: n/a
    Re: Lapua Brass



    [ 07-12-2003: Message edited by: S1 ]
    Reply With Quote
    Reply

    Bookmarks

    Thread Tools
    Display Modes


    Similar Threads for: Lapua Brass
    Thread Thread Starter Forum Replies Last Post
    NORMA 338 Lapua brass VS Lapua ! Hmmmm? 300WSMMAD Rifles, Bullets, Barrels & Ballistics 9 10-09-2012 02:48 PM
    What is the difference between Norma and Lapua 338 Lapua Magnum brass? jhegg Reloading 8 05-22-2012 12:12 AM
    338 Lapua Brass compared to 300 Remington Ultra Brass DANTEC Rifles, Bullets, Barrels & Ballistics 6 02-29-2012 11:43 PM
    ***WTS--Lapua 338 Lapua Brass**100 Peices NEW*** jcvibby Reloading Equipment and Components 2 08-21-2011 10:02 AM
    WTS: 125 .338 Lapua (Lapua Brand) Once Fired Brass... *** SOLD *** Bronson90 Guns For Sale 1 08-07-2004 01:53 PM


    All times are GMT -5. The time now is 03:32 AM.


    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC