Update on my rifle. I am loading Berger 168 Hunting VLD"s with 65 grains of IMR 7828. Federal Gold Medal Match Standard Rifle Primers and Federal Brass Cases. I used the recommendations from Berger on setting the bullets for seating depth. Here is the group sizes as the seating depths got deeper.
Load Number 1 set at .010 off rifling. Bullet #1-3 in same hole with #4 hitting a little low.
Load Number 2 set at .040 off rifling. Bullet #1,2,4 almost touching with #3 low and left.
Load Number 3 set at .080 off rifling. All 4 bullets landed in the one inch square in a clockwise pattern.
Load Number 4 set at .120 off rifling and will actually fit in the magazine. 4 bullets 1/2 inch group. I believe I am going to go with this one.